In your script, use signalling=fxo_ks, you have TDM04B?
I have TDM400 with fxo modules and use
signalling=fxs_ks
Regards
On 6/15/06, news.asterisk.users
<[EMAIL PROTECTED]> wrote:
I did try fxotune.. it did wonders on echo and audio quality when dialing in.
Before the zapata upgrade it did nothing (the -d -b options weren't there).
I found a page on voip-info.org that talked about using the new version and
followed what was there:
amportal stop
./fxotune -d -b 2
./fxotune -d -b 3
./fxotune -d -b 2 -w 1004
./fxotune -d -b 3 -w 1004
./fxotune -i 5 -t 1
./fxotune -d -b 2 -w 1004
./fxotune -d -b 3 -w 1004
./fxotune -i 4
./fxotune -s
amportal start
/etc/fxotune.conf:
2=5,3,251,250,2,253,255,255,254
3=5,1,248,252,4,253,1,0,0
If I run just plain old fxotune -i 4 then I get this in fxotune.conf:
2=14,0,0,0,0,0,0,0,0
3=5,0,0,0,0,0,0,0,0
cat /proc/interrupts
CPU0 CPU1
0: 85779369 85750198 IO-APIC-edge timer
1: 139 126 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 58 0 IO-APIC-edge i8042
14: 134660 128889 IO-APIC-edge libata
15: 20 20 IO-APIC-edge ide1
169: 273 164 IO-APIC-level HDA Intel
177: 133013 292360 IO-APIC-level sky2
185: 85757110 85717840 IO-APIC-level wctdm
NMI: 0 0
LOC: 171545341 171545343
ERR: 0
MIS: 0
/etc/asterisk/zapata.conf:
language=en
context=from-pstn
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
group=0
callgroup=1
pickupgroup=1
immediate=no
signalling=fxo_ks
rxgain=0.0
txgain=0.0
channel =>1
signalling=fxo_ks
rxgain=0.0
txgain=0.0
channel =>4
signalling=fxs_ks
rxgain=8.0
txgain=1.0
channel =>2
signalling=fxs_ks
rxgain=8.0
txgain=1.0
channel => 3
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf
Also although the 400P card says it's a revision J card it is detected as a revision I card:
Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Fabio wrote:Hi Carlos,- send us your interrupts configuration: cat /proc/interrupts- try adjusting line impedancy; see fxotune on zaptel source directory.cheers,Fabay
-----Mensaje original-----
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]En nombre de news.asterisk.users
Enviado el: Jueves, 15 de Junio de 2006 08:19 a.m.
Para: Asterisk Users Mailing List - Non-Commercial Discussion
Asunto: Re: [Asterisk-Users] Low volume/ audio problems on TDM400 card
That is the first thing I did.. rxgain seems to help to make it louder when the two PSTN lines are bridged but also affects
the audio quality adversely. It's very touchy.. it also causes horrible feedback (loud screeching when lines bridge).
I've upgraded zapata and libpri too.
JD
Carlos Rojas wrote:Hi,
I solved this problem in zapata.conf file
;rxgain=0.0 ;Volume RX
rxgain=8.0 ;Volume RX
;txgain=0.0 ;Volume TX
txgain=1.0 ;Volume TX
Regards
On 6/9/06, news.asterisk.users < [EMAIL PROTECTED]> wrote:I've been attempting to get this TDM400 card to work since March.
While it sort of works, I'm having a lot of audio issues with it.
I am on Asterisk 1.2.9.1 svn rev 32797 and Zaptel 1.2.6.
I've tried moving it to beefier hardware, upgrading asterisk/zaptel/etc,
moving the X100 cards around on the TDM400 card, nothing seems to fix it.
The card says it's a revision J card.
I get low volume on the receiving end (too quiet to hear when channels bridge) and
adjusting rx/txgain to comfortable levels causes popping and clicking when
calls are made that cause bridged channels. Upgrading to the newest zaptel fixed the horrible echo
and feedback issues I was having.
Before I send it in for a replacement I thought I'd ask about it in case there is a setting
I can make to fix it.
Kernel Version 2.6.9-34.0.1.ELsmp (SMP) Distro Name CentOS release 4.3 (Final) Uptime 2 hours 57 minutes Current Users 0 Load Averages 0.08 0.02 0.01
Network Usage
Device Received Sent Err/Drop lo 2.02 MB 2.02 MB 0/0 eth0 2.49 MB 4.67 MB 0/0 sit0 0.00 KB 0.00 KB 0/0
Hardware Information
Processors 2 Model Intel(R) Pentium(R) D CPU 2.66GHz CPU Speed 2.66 GHz Cache Size 1024 KB System Bogomips 10646.51 PCI Devices
- Audio device: Intel Corporation 82801G - Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface - Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller - IDE interface: Intel Corporation 82801GB/GR/GH - SMBus: Intel Corporation 82801G - VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller IDE Devices
- hdc: CD-RW IDE5224 SCSI Devices
- ATA WDC WD2500KS-00M (Direct-Access)
Memory Usage
Type Percent Capacity Free Used Size Physical Memory 20% 806.78 MB 195.65 MB 1002.43 MB - Kernel + applications 14% 135.73 MB - Buffers 2% 17.18 MB - Cached 4% 42.75 MB Disk Swap 0% 760.88 MB 0.00 KB 760.88 MB
Mounted Filesystems
Mount Type Partition Percent Capacity Free Used Size / ext3 /dev/sda2 1% 215.06 GB 1.74 GB 228.40 GB /dev/shm proc none 0% 501.21 MB 0.00 KB 501.21 MB /dev/shm sysfs none 0% 501.21 MB 0.00 KB 501.21 MB /dev/shm devpts none 0% 501.21 MB 0.00 KB 501.21 MB /boot ext3 /dev/sda1 17% 77.33 MB 16.29 MB 98.72 MB /dev/shm tmpfs none 0% 501.21 MB 0.00 KB 501.21 MB /dev/shm tmpfs none 0% 501.21 MB 0.00 KB 501.21 MB Totals : 1% 215.63 GB 1.75 GB 228.98 GB
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users