http://www.voip-info.org/wiki/index.php?page=Australia%20Asterisk% 20Details
Stumbled across this "Reverse On Idle Condition (ROIC)" 'feature' that sounds very promising. Will get it enabled later today and give it a go. On Tue, 2006-06-20 at 23:35 +1000, Carey O'Shea wrote: > Well I've found out what was causing my duplicate logging: it was > entirely a NAT issue. Found out it was only happening on some remote > endpoints (and not all of them), and that different routers proved to > not have duplicate logging. > > What part of NAT could cause this? Was it really sending all packets > twice, or something like that? Just seems kinda strange. Anyway, it's no > longer a problem. > > My original problem, however, remains. Phone doesn't stop ringing when > it's meant to. Only happens when call is via my ZapATA. > > Any ideas/help/input is appreciated! > > Regards, > Carey. > > On Sun, 2006-06-11 at 15:18 +1000, Carey O'Shea wrote: > > Does anyone have any ideas as to what can cause this large delay to stop > > ringing? > > > > It's quite a show stopper... imagine ringing a business and being > > answered by 3 different people, one after the other, all talking over > > the top of each other. > > > > On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea wrote: > > > Hi Undrhil, > > > > > > A logical idea, but unfortunately adding it didn't change anything. > > > > > > Two important points: > > > (1) When I test this with just IAX endpoints, no Zap, the call is hungup > > > immediately, (2) but the console still shows the user being called > > > twice. > > > > > > So as a wild guess, maybe the console logging twice is OK, and it's my > > > Zap configuration? > > > > > > * extensions.conf: > > > [incoming] > > > exten => s,1,Dial(IAX2/carey) > > > exten => s,2,Hangup(IAX2/carey) > > > > > > * zapata.conf: > > > [channels] > > > usecallerid=no > > > signalling=fxs_ks > > > context=incoming > > > channel => 4 > > > > > > * zaptel.conf > > > loadzone=au > > > defaultzone=au > > > fxsks=4 > > > > > > * ztcfg -vv > > > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > > 1 channels configured. > > > > > > I'm from Australia so I assume the loadzone and defaultzone is OK as per > > > zaptel.c. Did not post iax.conf due to my SIP phones having the same > > > behaviour, and IAX-to-IAX not exhibiting the problem. > > > > > > > > > On Fri, 2006-06-09 at 04:54 +0000, [EMAIL PROTECTED] wrote: > > > > So, your dialplan for that incoming call is just the one line? > > > > > > > > exten => > > > > s,1,Dial(IAX2/carey) > > > > > > > > Nothing else? Try adding a Hangup command on the > > > > next priority and see if that helps any. > > > > > > > > exten => s,2,Hangup > > > > > > > > If you > > > > already have a Hangup command in there, then I apologize for wasting > > > > your > > > > time. :) > > > > > > > > Undrhil > > > > > > > > --- Asterisk Users Mailing List - Non-Commercial Discussion > > > > <asterisk-users@lists.digium.com wrote: > > > > I have a TDM-400P with one FXO module. > > > > On an incoming call, I have set > > > > > Asterisk to dial my phone (exten => s,1,Dial(IAX2/carey)), > > > > which is > > > > > basically the only thing in my dialplan. > > > > > > > > > > When the call > > > > is answered by the PSTN phone first, or when the ringing > > > > > call is hung up, > > > > Asterisk keeps ringing for 5+ seconds, which causes > > > > > trouble (the answering > > > > of already answered calls). > > > > > > > > > > I noticed in the Asterisk console that > > > > my phone is called twice every > > > > > time there is an incoming call. Is this > > > > normal, and could it be causing > > > > > this behaviour? > > > > > > > > > > If not, any ideas > > > > as to what could be causing this? I can provide full > > > > > debug logs and my > > > > relevant configuration if needed. > > > > > > > > > > Console log: > > > > > > > > > > -- Starting > > > > simple switch on 'Zap/4-1' > > > > > -- Executing Dial("Zap/4-1", "IAX2/carey") > > > > in new stack > > > > > -- Called carey > > > > > -- Starting simple switch on 'Zap/4-1' > > > > > > > > > -- Executing Dial("Zap/4-1", "IAX2/carey") in new stack > > > > > -- Called > > > > carey > > > > > -- Call accepted by 10.0.12.102 (format ulaw) > > > > > -- Format > > > > for call is ulaw > > > > > -- Call accepted by 10.0.12.102 (format ulaw) > > > > > > > > > -- Format for call is ulaw > > > > > -- IAX2/carey-1 is ringing > > > > > -- > > > > IAX2/carey-1 is ringing > > > > > -- Hungup 'IAX2/carey-1' > > > > > == Spawn extension > > > > (incoming, s, 1) exited non-zero on 'Zap/4-1' > > > > > -- Hungup 'Zap/4-1' > > > > > -- Hungup 'IAX2/carey-1' > > > > > == Spawn extension (incoming, s, 1) exited > > > > non-zero on 'Zap/4-1' > > > > > -- Hungup 'Zap/4-1' > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > > > > > > > Asterisk-Users > > > > mailing list > > > > > To UNSUBSCRIBE or update options visit: > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > > _______________________________________________ > > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > > > > > Asterisk-Users mailing list > > > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > > > Asterisk-Users mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users