Hi, At least I have one E1 to test my E100P.
My telco company in Spain has installed one LiteSpan 1540 NT (UTR 2M) I make a crossover cable between E100P and UTR. 1 <-> 4 2 <-> 5 after loading drivers red led on e100p is blinking and alarm is flashing on UTR. What is wrong ? my zaptel.conf inf: span=1,0,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 best regards, Jorge Castellet [EMAIL PROTECTED] ----- Original Message ----- From: "rnc Info Lists" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 03, 2003 4:08 PM Subject: Re: [Asterisk-Users] New IAX software phone (for WIndows platform) > > Hi , > > > > > > I even think to avoid using an installer.... mainly because the installer > > part is bigger that the application himself. > > What do you think? > > > > Dan, > I agree that if an installer or registry entries are not needed then it > makes an automated rollout much easier. Also makes it possible to run the > program from a diskette/CD so as to be really portable between systems. > However, the installer will be necessary for the acceptance by the > "non-geeks". > > I only had a short time to run your program last night but it worked well. > Configuration was easy and it worked the first time! The problem with > changing address book entries was encountered but that has already been > reported. Will do more extensive testing tonight with the version from > today. Thanks for a good program. Looking forward to it being GPL and > the further development. > > Robert > Germany > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users