On Mon, 3 Nov 2003 17:15:21 -0600
Don Pobanz <[EMAIL PROTECTED]> wrote:
> You also need to verify that you are using loop timing and not
> internal timing. (Your telco will provide timing)
>
> in zaptel.conf you should have something like
> span=1,1,0,ccs,hdb3,crc4
> where the second 1 says to use the timing from the incoming E1 line.
My zaptel.conf is like the above, except the crc4. My telco doesn't use
CRC.
Eduardo
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
