Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear "scratches" and "plops". It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to play with echotail and echosquelch but the quality is always terrible.
Any suggestion is welcomed. Thanks, Ben </etc/asterisk/capi.conf> [general] rxgain=0.5 txgain=0.5 language=fr ;set default language ;ulaw=yes ;set this, if you live in u-law world instead of a-law [ISDN1] isdnmode=DID ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) ;when using NT-mode, 'DID' should be set in any case incomingmsn=* ;allow incoming calls to this list of MSNs/DIDs, * = any controller=1 ;capi controller number to use group=9 ;dialout group softdtmf=on ;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls ;echosquelch=2 ;_VERY_PRIMITIVE_ echo suppression echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation ;(possible values: 'no', 'yes', 'force', 'g164', 'g165') echocancelold=no ;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=128 ;echo cancel tail setting devices=2 ;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for PRI) _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users