* Paul Hewlett <[EMAIL PROTECTED]> wrote: > On Thursday 29 June 2006 20:08, Sebastian Kayser wrote: > > i successfully connected our old PBX to an asterisk server with a > > junghanns quadBRI, the quadBRI ports running in bri_cpe_ptmp mode > > connected to the interal PBX ISDN ports. > > > > Now i tried to turn it round as our PBX depends on it for some features > > and changed one of the quadBRI ports to bri_net signalling and connected > > it to one of the external PBX ISDN ports (how do you name that in telco > > jargon?). > > did you change the jumpers on the card ?
Yes, i did =) Port 3 is jumpered as NT. asterisk*CLI> zap show status Description Alarms IRQ bpviol CRC4 quadBRI PCI ISDN Card 1 Span 1 [TE] (ca· OK 0 0 0 quadBRI PCI ISDN Card 1 Span 2 [TE] (ca· OK 0 0 0 quadBRI PCI ISDN Card 1 Span 3 [NT] (ca· OK 0 0 0 quadBRI PCI ISDN Card 1 Span 4 [TE] (ca· OK 0 0 0 > > The card led goes green (indicates an ISDN link). Strange thing here is, the led stays green even if i unplug the cable ... - Sebastian _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users