Hi C F,
you say Flash asterisk command send a flash signal to old pbx so that it
sees that command as coming from an analog phone. But since Flash is not
a digit, how can I catch it from within asterisk? How can I tell
asterisk (es inside extensions.conf) to do something whene receive it
from a phone?
TIA
Giorgio Incantalupo
C F wrote:
The flash command will do just that. However flash only works on FXO
ports and not on SIP FXO ATAs, if you use the later then you will have
to find out how your ATA supports it.
The easiest way to set this up is to use the features.conf
On 7/3/06, Giorgio Incantalupo <[EMAIL PROTECTED]> wrote:
Hi,
I have to connect an old PBX to a new Asterisk box. but I must keep the
same flash button functionality of the old system. Is it possible to
tell asterisk to send a Flash signal to old pbx when receiving it from a
phone? I know there is a flash command inside asterisk....is there
anybody who tried and deployed such a double-pbx system with success?
TIA
Giorgio Incantalupo
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
