I've spent several days now trying to get my TDM400 card to work. I'm
running TrixBox 1.1 (at least to start). I've tried an old PII 233mhz
with 256 MB, and a modern Dell Dimension 8400 (P4 3.0 ghz, 1 GM RAM). On
both machines I have a series of installation headaches, some of which
seem to be TrixBox's fault, since they are fairly consistent between
machines.
I can get Asterix & FreePBX working as long as I don't use the TDM400.
It seems to work great with the soft SIP phone. I can dial into it, get
voicemail, record messages, etc. But I need it to work with the TDM400
card to be useful. I've followed the Nerd Vittles and SureTeq guides
approximately, and think I should have the ability to receive calls and
dial out over the TDM's FXO port.
When I dial in, and watch from FreePBX's panel, I see that the "Zap 1"
trunk goes red. The SIP soft phone I have the call directed to then gets
the call. I have the SIP soft phone on auto-answer, so it picks up. Or,
rather, it thinks it picks up, since the calling phone continues to ring
and eventually goes to my POTS voicemail.
A similar thing happens when I dial out. I call my cell phone, Zap 1
trunk goes red again, and the soft SIP phone says "call established" but
the call never gets made on the phone line. (I can pick up with a
conventional phone and get a dialtone.)
It seems to me that * has recognized the TDM correctly, and that I've
picked the right port on my TDM. But, something is clearly wrong, and I
can't find mention of this kind of thing in the FAQs.
-------------
Here I call the inbound trunk, which Asterisk is supposed to pick up.
[EMAIL PROTECTED] etc]# asterisk -rvvvv
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Found
Asterisk 1.2.9.1 svn rev 34876, Copyright (C) 1999 - 2006 Digium, Inc.
and others.
Created by Mark Spencer <[EMAIL PROTECTED]>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for
details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'show license' for details.
=========================================================================
Connected to Asterisk 1.2.9.1 svn rev 34876 currently running on
asterisk1 (pid = 3170)
Verbosity was 1 and is now 4
Core debug is at least 1
-- Starting simple switch on 'Zap/1-1'
-- Executing NoOp("Zap/1-1", "Entering from-zaptel with DID == ")
in new stack
-- Executing Set("Zap/1-1", "DID=s") in new stack
-- Executing NoOp("Zap/1-1", "DID is now s") in new stack
-- Executing GotoIf("Zap/1-1", "1?zapok:notzap") in new stack
-- Goto (from-zaptel,s,7)
-- Executing NoOp("Zap/1-1", "Is a Zaptel Channel") in new stack
-- Executing Set("Zap/1-1", "CHAN=1-1") in new stack
-- Executing Set("Zap/1-1", "CHAN=1") in new stack
-- Executing Macro("Zap/1-1", "from-zaptel-1|s|1") in new stack
-- Executing NoOp("Zap/1-1", "Returned from Macro from-zaptel-1")
in new stack
-- Executing Goto("Zap/1-1", "ext-did|s|1") in new stack
-- Goto (ext-did,s,1)
-- Executing Set("Zap/1-1", "FROM_DID=s") in new stack
-- Executing Set("Zap/1-1", "FAX_RX=disabled") in new stack
-- Executing Goto("Zap/1-1", "ext-local|200|1") in new stack
-- Goto (ext-local,200,1)
-- Executing Macro("Zap/1-1", "exten-vm|200|200") in new stack
-- Executing Macro("Zap/1-1", "user-callerid") in new stack
-- Executing GotoIf("Zap/1-1", "0?report") in new stack
-- Executing GotoIf("Zap/1-1", "0?start") in new stack
-- Executing Set("Zap/1-1", "REALCALLERIDNUM=") in new stack
-- Executing NoOp("Zap/1-1", "REALCALLERIDNUM is ") in new stack
-- Executing Set("Zap/1-1", "AMPUSER=") in new stack
-- Executing Set("Zap/1-1", "AMPUSERCIDNAME=") in new stack
-- Executing GotoIf("Zap/1-1", "1?report") in new stack
-- Goto (macro-user-callerid,s,9)
-- Executing NoOp("Zap/1-1", "Using CallerID "" <>") in new stack
-- Executing Set("Zap/1-1", "FROMCONTEXT=exten-vm") in new stack
-- Executing Set("Zap/1-1", "VMBOX=200") in new stack
-- Executing Set("Zap/1-1", "EXTTOCALL=200") in new stack
-- Executing Set("Zap/1-1", "CFUEXT=") in new stack
-- Executing Set("Zap/1-1", "RT=15") in new stack
-- Executing Macro("Zap/1-1", "record-enable|200|IN") in new stack
-- Executing GotoIf("Zap/1-1", "0 > 0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing AGI("Zap/1-1",
"recordingcheck|20060704-220403|1152075839.2") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20060704-220403|1152075839.2: Inbound recording enabled.
recordingcheck|20060704-220403|1152075839.2:
CALLFILENAME=20060704-220403-1152075839.2
-- AGI Script recordingcheck completed, returning 0
-- Executing Monitor("Zap/1-1",
"wav49|20060704-220403-1152075839.2| mb") in new stack
-- Executing GotoIf("Zap/1-1", "0?dolocaldial|1") in new stack
-- Executing Macro("Zap/1-1", "dial|15|tr|200") in new stack
-- Executing AGI("Zap/1-1", "dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
dialparties.agi: Starting New Dialparties.agi
-- dialparties.agi: priority is 1
dialparties.agi: Caller ID name is 'unknown' number is 'unknown'
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 200 to extension map
-- dialparties.agi: Extension 200 cf is disabled
-- dialparties.agi: Extension 200 do not disturb is disabled
> dialparties.agi: extnum: 200
> dialparties.agi: exthascw: 0
> dialparties.agi: exthascfb: 0
> dialparties.agi: extcfb:
> dialparties.agi: exthascfu: 0
> dialparties.agi: extcfu:
== Manager 'admin' logged on from 127.0.0.1
== Manager 'admin' logged off from 127.0.0.1
> dialparties.agi: ExtensionState: 0
-- dialparties.agi: Checking CW and CFB status for extension 200
-- dialparties.agi: DbSet CALLTRACE/200 to unknown
-- AGI Script dialparties.agi completed, returning 0
-- Executing Dial("Zap/1-1", "SIP/200|15|tr") in new stack
-- Called 200
-- SIP/200-423d is ringing
-- SIP/200-423d answered Zap/1-1
-- ***[JB LOG]*** fixed jitterbuffer created on channel Zap/1-1
[Supposedly Asterisk has answered here, and the call is in progress, but
in fact the TDM400 card has not picked up.]
[Here I hang up the soft phone]
-- Hungup 'Zap/1-1'
-- ***[JB LOG]*** fixed jitterbuffer destroyed on channel Zap/1-1
asterisk1*CLI>
-----------------------------------
I have just one FXO daughterboard on my TRM400 right now, nothing else.
[EMAIL PROTECTED] ~]# ztcfg -vv
Zaptel Version: SVN-trunk-r1199
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
-----------------------------------------------------------------
Here's the same inbound call again, from /var/log/asterisk/full.
Jul 4 21:11:48 DEBUG[3403] manager.c: Manager received command 'Command'
Jul 4 21:13:48 DEBUG[3403] manager.c: Manager received command 'Command'
Jul 4 21:13:48 DEBUG[3403] manager.c: Manager received command 'Command'
Jul 4 21:15:48 DEBUG[3403] manager.c: Manager received command 'Command'
Jul 4 21:15:48 DEBUG[3403] manager.c: Manager received command 'Command'
Jul 4 21:17:48 DEBUG[3403] manager.c: Manager received command 'Command'
Jul 4 21:17:48 DEBUG[3403] manager.c: Manager received command 'Command'
Jul 4 21:19:48 DEBUG[3403] manager.c: Manager received command 'Command'
Jul 4 21:19:48 DEBUG[3403] manager.c: Manager received command 'Command'
Jul 4 21:20:14 DEBUG[3246] chan_zap.c: Monitor doohicky got event Ring
Begin on channel 1
Jul 4 21:20:16 DEBUG[3246] chan_zap.c: Monitor doohicky got event
Ring/Answered on channel 1
Jul 4 21:20:16 DEBUG[4605] app_queue.c: Device 'Zap/1' changed to state
'2' (In use) but we don't care becaus
e they're not a member of any queue.
Jul 4 21:20:16 VERBOSE[4606] logger.c: -- Starting simple switch on
'Zap/1-1'
Jul 4 21:20:24 WARNING[4606] chan_zap.c: CallerID returned with error
on channel 'Zap/1-1'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'NoOp'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing NoOp("Zap/1-1",
"Entering from-zaptel with DID == ")
in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Expression result is '1'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Function result is 's'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"DID=s") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'NoOp'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing NoOp("Zap/1-1",
"DID is now s") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Expression result is '1'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'GotoIf'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
GotoIf("Zap/1-1", "1?zapok:notzap") in new stack
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Goto (from-zaptel,s,7)
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'NoOp'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing NoOp("Zap/1-1",
"Is a Zaptel Channel") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"CHAN=1-1") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Function result is '1'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"CHAN=1") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Macro'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
Macro("Zap/1-1", "from-zaptel-1|s|1") in new stack
Jul 4 21:20:24 WARNING[4606] app_macro.c: No such context
'macro-from-zaptel-1' for macro 'from-zaptel-1'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'NoOp'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing NoOp("Zap/1-1",
"Returned from Macro from-zaptel-1")
in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Goto'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Goto("Zap/1-1",
"ext-did|s|1") in new stack
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Goto (ext-did,s,1)
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"FROM_DID=s") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"FAX_RX=disabled") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Goto'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Goto("Zap/1-1",
"ext-local|200|1") in new stack
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Goto (ext-local,200,1)
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Macro'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
Macro("Zap/1-1", "exten-vm|200|200") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Macro'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
Macro("Zap/1-1", "user-callerid") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Expression result is '0'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'GotoIf'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
GotoIf("Zap/1-1", "0?report") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Not taking any branch
Jul 4 21:20:24 DEBUG[4606] pbx.c: Expression result is '0'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'GotoIf'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
GotoIf("Zap/1-1", "0?start") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Not taking any branch
Jul 4 21:20:24 DEBUG[4606] pbx.c: Function result is ''
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"REALCALLERIDNUM=") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'NoOp'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing NoOp("Zap/1-1",
"REALCALLERIDNUM is ") in new stack
Jul 4 21:20:24 DEBUG[4606] db.c: Unable to find key '/user' in family
'DEVICE'
Jul 4 21:20:24 DEBUG[4606] func_db.c: DB: DEVICE//user not found in
database.
Jul 4 21:20:24 DEBUG[4606] pbx.c: Function result is ''
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"AMPUSER=") in new stack
Jul 4 21:20:24 DEBUG[4606] db.c: Unable to find key '/cidname' in
family 'AMPUSER'
Jul 4 21:20:24 DEBUG[4606] func_db.c: DB: AMPUSER//cidname not found in
database.
Jul 4 21:20:24 DEBUG[4606] pbx.c: Function result is ''
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"AMPUSERCIDNAME=") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Expression result is '1'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'GotoIf'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
GotoIf("Zap/1-1", "1?report") in new stack
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Goto
(macro-user-callerid,s,9)
Jul 4 21:20:24 DEBUG[4606] pbx.c: Function result is '"" <>'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'NoOp'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing NoOp("Zap/1-1",
"Using CallerID "" <>") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"FROMCONTEXT=exten-vm") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"VMBOX=200") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"EXTTOCALL=200") in new stack
Jul 4 21:20:24 DEBUG[4606] db.c: Unable to find key '200' in family 'CFU'
Jul 4 21:20:24 DEBUG[4606] func_db.c: DB: CFU/200 not found in database.
Jul 4 21:20:24 DEBUG[4606] pbx.c: Function result is ''
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"CFUEXT=") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Expression result is '1'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Expression result is '0'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Expression result is '1'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Function result is '15'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Set'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Set("Zap/1-1",
"RT=15") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Macro'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
Macro("Zap/1-1", "record-enable|200|IN") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Function result is '0'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'GotoIf'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
GotoIf("Zap/1-1", "0 > 0?2:4") in new stack
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Goto
(macro-record-enable,s,4)
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'AGI'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing AGI("Zap/1-1",
"recordingcheck|20060704-212024|115207
3216.0") in new stack
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Launched AGI Script
/var/lib/asterisk/agi-bin/recordingcheck
Jul 4 21:20:24 VERBOSE[4606] logger.c:
recordingcheck|20060704-212024|1152073216.0: Inbound recording enabl
ed.
Jul 4 21:20:24 VERBOSE[4606] logger.c:
recordingcheck|20060704-212024|1152073216.0: CALLFILENAME=20060704-2
12024-1152073216.0
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- AGI Script recordingcheck
completed, returning 0
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Monitor'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
Monitor("Zap/1-1", "wav49|20060704-212024-1152073216.
0| mb") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Expression result is '0'
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'GotoIf'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
GotoIf("Zap/1-1", "0?dolocaldial|1") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Not taking any branch
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Macro'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing
Macro("Zap/1-1", "dial|15|tr|200") in new stack
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'AGI'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing AGI("Zap/1-1",
"dialparties.agi") in new stack
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Launched AGI Script
/var/lib/asterisk/agi-bin/dialparties.agi
Jul 4 21:20:24 VERBOSE[4606] logger.c: dialparties.agi: Starting New
Dialparties.agi
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- dialparties.agi:
priority is 1
Jul 4 21:20:24 VERBOSE[4606] logger.c: dialparties.agi: Caller ID
name is 'unknown' number is 'unknown'
Jul 4 21:20:24 VERBOSE[4606] logger.c: dialparties.agi: Methodology
of ring is 'none'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- dialparties.agi: Added
extension 200 to extension map
Jul 4 21:20:24 DEBUG[4606] db.c: Unable to find key '200' in family 'CF'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- dialparties.agi:
Extension 200 cf is disabled
Jul 4 21:20:24 DEBUG[4606] db.c: Unable to find key '200' in family 'DND'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- dialparties.agi:
Extension 200 do not disturb is disabled
Jul 4 21:20:24 DEBUG[4606] db.c: Unable to find key '200' in family 'CW'
Jul 4 21:20:24 DEBUG[4606] db.c: Unable to find key '200' in family 'CFB'
Jul 4 21:20:24 DEBUG[4606] db.c: Unable to find key '200' in family 'CFU'
Jul 4 21:20:24 VERBOSE[4606] logger.c: > dialparties.agi:
extnum: 200
Jul 4 21:20:24 VERBOSE[4606] logger.c: > dialparties.agi:
exthascw: 0
Jul 4 21:20:24 VERBOSE[4606] logger.c: > dialparties.agi:
exthascfb: 0
Jul 4 21:20:24 VERBOSE[4606] logger.c: > dialparties.agi: extcfb:
Jul 4 21:20:24 VERBOSE[4606] logger.c: > dialparties.agi:
exthascfu: 0
Jul 4 21:20:24 VERBOSE[4606] logger.c: > dialparties.agi: extcfu:
Jul 4 21:20:24 DEBUG[4609] manager.c: Manager received command 'login'
Jul 4 21:20:24 DEBUG[4609] config.c: Parsing /etc/asterisk/manager.conf
Jul 4 21:20:24 DEBUG[4609] config.c: Parsing
/etc/asterisk/manager_custom.conf
Jul 4 21:20:24 WARNING[4609] config.c: Unknown directive
'permit=192.168.1.0/255.255.255.0' at line 18 of man
ager_custom.conf
Jul 4 21:20:24 DEBUG[4609] acl.c: 0.0.0.0/0.0.0.0/0.0.0.0 appended to
acl for peer
Jul 4 21:20:24 DEBUG[4609] acl.c: 127.0.0.1/255.255.255.0/255.255.255.0
appended to acl for peer
Jul 4 21:20:24 DEBUG[4609] acl.c: ##### Testing 127.0.0.1 with 0.0.0.0
Jul 4 21:20:24 DEBUG[4609] acl.c: ##### Testing 127.0.0.1 with 127.0.0.0
Jul 4 21:20:24 VERBOSE[4609] logger.c: == Manager 'admin' logged on
from 127.0.0.1
Jul 4 21:20:24 DEBUG[4609] manager.c: Manager received command
'ExtensionState'
Jul 4 21:20:24 DEBUG[4609] manager.c: Manager received command 'Logoff'
Jul 4 21:20:24 VERBOSE[4609] logger.c: == Manager 'admin' logged off
from 127.0.0.1
Jul 4 21:20:24 VERBOSE[4606] logger.c: > dialparties.agi:
ExtensionState: 0
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- dialparties.agi:
Checking CW and CFB status for extension 200
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- dialparties.agi: DbSet
CALLTRACE/200 to unknown
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- AGI Script
dialparties.agi completed, returning 0
Jul 4 21:20:24 DEBUG[4606] pbx.c: Launching 'Dial'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Executing Dial("Zap/1-1",
"SIP/200|15|tr") in new stack
Jul 4 21:20:24 DEBUG[4606] chan_sip.c: Allocating new SIP dialog for
(No Call-ID) - INVITE (With RTP)
Jul 4 21:20:24 DEBUG[4606] chan_sip.c: Setting NAT on RTP to 0
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-dial-s-10.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable MACRO_DEPTH.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable ds.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-dial-s-1.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable ARG3.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable ARG2.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable ARG1.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable MACRO_PRIORITY.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable MACRO_CONTEXT.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable MACRO_EXTEN.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-exten-vm-s-9.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-exten-vm-s-8.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable AUTO_MONITOR.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-record-enable-s-999.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable CALLFILENAME.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-record-enable-s-4.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-record-enable-s-1.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-exten-vm-s-7.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable RT.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-exten-vm-s-6.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable CFUEXT.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-exten-vm-s-5.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable EXTTOCALL.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-exten-vm-s-4.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable VMBOX.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-exten-vm-s-3.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable FROMCONTEXT.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-exten-vm-s-2.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-user-callerid-s-9.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-user-callerid-s-7.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable AMPUSERCIDNAME.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-user-callerid-s-6.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable AMPUSER.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-user-callerid-s-5.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-user-callerid-s-4.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable REALCALLERIDNUM.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-user-callerid-s-3.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-user-callerid-s-2.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-user-callerid-s-1.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-macro-exten-vm-s-1.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-ext-local-200-1.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-ext-did-s-3.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable FAX_RX.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-ext-did-s-2.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable FROM_DID.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-ext-did-s-1.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-12.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-11.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-10.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable CHAN.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-9.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-8.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-7.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-4.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-3.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable DID.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-2.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
STACK-from-zaptel-s-1.
Jul 4 21:20:24 DEBUG[4606] channel.c: Not copying variable
TRANSFERCAPABILITY.
Jul 4 21:20:24 DEBUG[4606] chan_sip.c: Outgoing Call for 200
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- Called 200
Jul 4 21:20:24 DEBUG[4606] chan_zap.c: Requested indication 3 on
channel Zap/1-1
Jul 4 21:20:24 DEBUG[3248] chan_sip.c: (Provisional) Stopping
retransmission (but retaining packet) on '581f9
[EMAIL PROTECTED]' Request 102: Found
Jul 4 21:20:24 DEBUG[3210] channel.c: Avoiding initial deadlock for
'SIP/200-cd7e'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- SIP/200-cd7e is ringing
Jul 4 21:20:24 DEBUG[4610] app_queue.c: Device 'SIP/200' changed to
state '6' (Ringing) but we don't care bec
ause they're not a member of any queue.
Jul 4 21:20:24 DEBUG[4606] rtp.c: Got RTCP report of 132 bytes
Jul 4 21:20:24 DEBUG[3248] chan_sip.c: Acked pending invite 102
Jul 4 21:20:24 DEBUG[3248] chan_sip.c: Stopping retransmission on
'[EMAIL PROTECTED]
2' of Request 102: Match Found
Jul 4 21:20:24 DEBUG[3248] chan_sip.c: build_route: Contact hop:
<sip:[EMAIL PROTECTED]:30540;rinstance=287de7801
e287bce>
Jul 4 21:20:24 DEBUG[3210] channel.c: Avoiding initial deadlock for
'SIP/200-cd7e'
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- SIP/200-cd7e answered Zap/1-1
Jul 4 21:20:24 DEBUG[4606] chan_zap.c: Requested indication -1 on
channel Zap/1-1
Jul 4 21:20:24 DEBUG[4606] channel.c: Set channel Zap/1-1 to read
format ulaw
Jul 4 21:20:24 DEBUG[4606] channel.c: Set channel SIP/200-cd7e to write
format ulaw
Jul 4 21:20:24 DEBUG[4606] channel.c: Set channel SIP/200-cd7e to read
format ulaw
Jul 4 21:20:24 DEBUG[4606] channel.c: Set channel Zap/1-1 to write
format ulaw
Jul 4 21:20:24 DEBUG[4606] chan_zap.c: Took Zap/1-1 off hook
^^^^ This is NOT happening!
Jul 4 21:20:24 DEBUG[4606] chan_zap.c: Enabled echo cancellation on
channel 1
Jul 4 21:20:24 DEBUG[4606] chan_zap.c: Engaged echo training on channel 1
Jul 4 21:20:24 DEBUG[4611] app_queue.c: Device 'SIP/200' changed to
state '2' (In use) but we don't care beca
use they're not a member of any queue.
Jul 4 21:20:24 DEBUG[4612] app_queue.c: Device 'Zap/1' changed to state
'2' (In use) but we don't care becaus
e they're not a member of any queue.
Jul 4 21:20:24 DEBUG[4606] rtp.c: Ooh, format changed from unknown to ulaw
Jul 4 21:20:24 VERBOSE[4606] logger.c: -- ***[JB LOG]*** fixed
jitterbuffer created on channel Zap/1-1
Jul 4 21:20:24 DEBUG[4606] channel.c: Nobody there, continuing...
Jul 4 21:20:24 DEBUG[4606] channel.c: Nobody there, continuing...
Jul 4 21:20:24 DEBUG[4606] channel.c: Nobody there, continuing...
Jul 4 21:20:24 DEBUG[4606] channel.c: Nobody there, continuing...
Jul 4 21:20:24 DEBUG[4606] channel.c: Nobody there, continuing...
Jul 4 21:20:24 DEBUG[4606] channel.c: Nobody there, continuing...
Jul 4 21:20:24 DEBUG[4606] channel.c: Nobody there, continuing...
Jul 4 21:20:24 DEBUG[4606] channel.c: Nobody there, continuing...
Jul 4 21:20:24 DEBUG[4606] channel.c: Nobody there, continuing...
[Many more of these...]
Jul 4 22:05:19 DEBUG[5555] channel.c: Nobody there, continuing...
Jul 4 22:05:19 DEBUG[5555] channel.c: Nobody there, continuing...
Jul 4 22:05:20 DEBUG[5555] channel.c: Nobody there, continuing...
Jul 4 22:05:20 DEBUG[5555] rtp.c: Got RTCP report of 176 bytes
Jul 4 22:05:20 DEBUG[5555] channel.c: Nobody there, continuing...
Jul 4 22:05:20 DEBUG[5555] channel.c: Nobody there, continuing...
Jul 4 22:05:20 DEBUG[5555] channel.c: Nobody there, continuing...
Jul 4 22:05:20 DEBUG[5555] channel.c: Nobody there, continuing...
Jul 4 22:05:20 DEBUG[5555] channel.c: Nobody there, continuing...
Jul 4 22:05:21 DEBUG[5555] channel.c: Nobody there, continuing...
Jul 4 22:05:21 DEBUG[5555] rtp.c: Got RTCP report of 160 bytes
Jul 4 22:05:21 DEBUG[5555] channel.c: Didn't get a frame from channel:
SIP/200-423d
Jul 4 22:05:21 DEBUG[5555] channel.c: Bridge stops bridging channels
Zap/1-1 and SIP/200-423d
Jul 4 22:05:21 DEBUG[5555] channel.c: Hanging up channel 'SIP/200-423d'
Jul 4 22:05:21 DEBUG[5555] chan_sip.c: Hangup call SIP/200-423d, SIP
callid [EMAIL PROTECTED])
Jul 4 22:05:21 DEBUG[5555] chan_sip.c: update_call_counter(200) -
decrement call limit counter
Jul 4 22:05:21 DEBUG[5555] app_dial.c: Exiting with DIALSTATUS=ANSWER.
Jul 4 22:05:21 DEBUG[5555] app_macro.c: Spawn extension
(macro-dial,s,10) exited non-zero on 'Zap/1-1' in macro 'dial'
Jul 4 22:05:21 DEBUG[5555] app_macro.c: Spawn extension
(macro-dial,s,10) exited non-zero on 'Zap/1-1' in macro 'exten-vm'
Jul 4 22:05:21 DEBUG[5775] app_queue.c: Device 'SIP/200' changed to
state '1' (Not in use) but we don't care because they're not a member of
any queue.
Jul 4 22:05:21 DEBUG[5555] pbx.c: Spawn extension (macro-dial,s,10)
exited non-zero on 'Zap/1-1'
Jul 4 22:05:21 DEBUG[5555] cdr_addon_mysql.c: cdr_mysql: inserting a
CDR record.
Jul 4 22:05:21 DEBUG[5555] cdr_addon_mysql.c: cdr_mysql: SQL command as
follows: INSERT INTO cdr
(calldate,clid,src,dst,dcontext,channel,dstchannel,lastapp,lastdata,duration,billsec,disposition,amaflags,accountcode,uniqueid)
VALUES ('2006-07-04 22:04:03','','','200','ext-local',
'Zap/1-1','SIP/200-423d','Monitor','wav49|20060704-220403-1152075839.2|
mX',78,78,'ANSWERED',3,'','1152075839.2')
Jul 4 22:05:21 DEBUG[5555] channel.c: Hanging up channel 'Zap/1-1'
Jul 4 22:05:21 DEBUG[5555] chan_zap.c: zt_hangup(Zap/1-1)
Jul 4 22:05:21 DEBUG[5555] chan_zap.c: Hangup: channel: 1 index = 0,
normal = 13, callwait = -1, thirdcall = -1
Jul 4 22:05:21 DEBUG[5555] chan_zap.c: disabled echo cancellation on
channel 1
Jul 4 22:05:21 DEBUG[5555] chan_zap.c: Set option TDD MODE, value:
OFF(0) on Zap/1-1
Jul 4 22:05:21 DEBUG[5555] chan_zap.c: Updated conferencing on 1, with
0 conference users
Jul 4 22:05:21 VERBOSE[5555] logger.c: -- Hungup 'Zap/1-1'
Jul 4 22:05:21 DEBUG[5555] res_monitor.c: monitor executing ( nice -n
19 soxmix
"/var/spool/asterisk/monitor/20060704-220403-1152075839.2-in.WAV"
"/var/spool/asterisk/monitor/20060704-220403-1152075839.2-out.WAV"
"/var/spool/asterisk/monitor/20060704-220403-1152075839.2.WAV" && rm -f
"/var/spool/asterisk/monitor/20060704-220403-1152075839.2-"* ) &
Jul 4 22:05:21 VERBOSE[5555] logger.c: -- ***[JB LOG]*** fixed
jitterbuffer destroyed on channel Zap/1-1
Jul 4 22:05:21 DEBUG[5779] app_queue.c: Device 'Zap/1' changed to state
'0' (Unknown) but we don't care because they're not a member of any queue.
Jul 4 22:07:08 DEBUG[3543] manager.c: Manager received command 'Command'
Jul 4 22:07:08 DEBUG[3543] manager.c: Manager received command 'Command'
[EMAIL PROTECTED] asterisk]#
------------------------------------------------------------------------
Help? Is there anything else I can do?
Stew
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users