Is your dial plan very simple, ie bypass FREEPBX
etc, to make sure no problems. There are also debug command in the CLI:
pri debug span Enables PRI debugging on a span pri intense debug span
Enables REALLY INTENSE PRI debugging
pri no debug span Disables PRI debugging on a span
pri show debug Displays current PRI debug settings
pri show span Displays PRI Information maybe also set the debug and verbose and
see what it says. Is your set the same, is Asterisk between
the line and the PBX or just Asterisk? Have you tried just using Trixbox? Thanks James From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Withnall My files were almost exactly the same. We
only have 10 channels and the clid signaling was different. We are however still getting the same problems.
I moved the box closer to the optomux (now we have 2m cable from the optomux to
the asterisk box.) Any other ideas? We still are having the
same problems and also, some dropouts in the middle of calls. Could the card be faulty ? I purchased it from
ebay second hand. PS. What does the
“Transfer=yes” do ? Thanks. From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James Sturges Hi, had a few ask for this so thought may
be of interest to the list. This is actually for the following setup: Telstra ISDN30 <---------> Asterisk
<---------> BP250 PABX The ISDN10, 20, 30’s are all the
same physical link, but you may need to change the bchan and dchan settings for
ISDN 10 or 20. We have had lot of issues over 12 months,
including physical cable issues, etc. But this config has passed Telstra
test equipment both on site and in the exchange. The calls dropping out
(for us) are timing issues do to telling Asterisk to gets it synch from the
Telstra line and providing synch to the PABX. Anyway, Here it is, does not look like
much but have had experts working on it for a while. The system handles 1800 – 2000 calls
per day. Thanks James ZAPATA.conf [channels] context=default musiconhold=default switchtype=euroisdn usecallerid=yes cidsignalling=v23 cidstart=polarity hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=800 rxgain=0.0 txgain=0.0 group=1 context=te405p-intelstra pridialplan=local signalling=pri_cpe callerid=asreceived channel=>1-15, 17-31 group=4 context=te405p-frombp250 pridialplan=local signalling=pri_net overlapdial=yes callerid=asreceived channel=>94-108, 110-124 ZAPTEL.conf # # Zaptel Configuration File # # This file is parsed by the Zaptel
Configurator, ztcfg span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,0,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 span=3,0,0,ccs,hdb3,crc4 bchan=63-77 dchan=78 bchan=79-93 span=4,0,0,ccs,hdb3,crc4 bchan=94-108 dchan=109 bchan=110-124 loadzone=au defaultzone=au From: James Sturges
[mailto:[EMAIL PROTECTED] Have had L O T S of trouble like this, the
settings zap config files seem to have to e exact, please send email to [EMAIL PROTECTED] and I will send
config files. Thanks James From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Withnall Recently we cut over to using asterisk (trixbox 1.1.1) for
our production system. We are using a TE110P digium card (Primary rate) with a
Telstra onramp 10. Sometimes when people call, on their end it doesn’t
seem to connect. On our end, we get caller id, it passes ok to the sip phone
but then no-one is there. Anyone have any similar problems and worked out how to solve
it ? Thanks. |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users