BJ Weschke wrote:
On 8/4/06, Steve Totaro <[EMAIL PROTECTED]> wrote:
I am not totally up to speed on the MX2800 but I have gone to loopback
tests and loop T1 25-28 and selected every possible selection while
watching pri debug span 1 on the console, no output at all.
Jerry Jones wrote:
> If you see no errors on your MX2800 for the ds3 then they are probably
> not the issue.
>
> What does the MX2800 show for T1 which do not work? If you loop toward
> * does the card see itself? Loop toward GX do they see?
>
>
> On Aug 4, 2006, at 11:15 AM, Steve Totaro wrote:
>
>> I have a DS3/T3 that was dropped into my telco closet as two coaxial
>> cables. A send and receive. I needed to extend it so I went to
>> Radio Shack to buy some barrel connectors. They did not have any but
>> they did have T-Connectors so I bought a couple of those.
>> Everything was fine up until I went to turn up the seventh set of
>> four T1s. They will not come up, no Asterisk output or greenlight on
>> a Digium TE410. Global Crossing says they only responsible for the
>> DS3. I wonder if the T-Connectors could be the problem?
>>
>> I have already tried the same cables and server on known working T1s
>> and they come up fine. My Adtran MX2800 shows OK for those T1s so I
>> dont think the problem is between the Adtran and Asterisk box (as
>> Global Crossing claims), I have tried changing to the second
>> controller card in the Adtran and also reseated the amphenol
>> connection between the Adtran MX2800 and the T1 breakout box.
>> Anyone with this kind of experience have any ideas?
>>
>> I am going to find some real barrel connectors and try that next.
>>
If your M13 is coming up clean, I'd double check the continuity to
those ports from the DSX connections out to the patch panel.
That was exactly the issue. The amphenol cable was loose on one end.
What is the best way to fasten these things? There is only a screw on
one side. I am duct taping these things down for now but what is the
standard way of fastening them? The Adtran didn't come with a clip or
velcro or anything, neither did the TenorAX boxes I am using.
Thanks
Steve
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
