probably need a crossed t1 cable
1-4
2-5
On Aug 4, 2006, at 4:20 PM, James Arscott wrote:
Hi, this is my first post, so go easy on me !
Sorry if this has been covered before, I could not find an answer that
helped me.
I am trying to achieve the following :
Telco ISDN30e PRI <-> Asterisk with TE210P <-> Siemens HiPath PBX
The siemens is a legacy PBX and I am not 100% of the modules etc
inside it,
it is being used in production at the moment and we have a need to
put the
Asterisk pbx as a gateway in between the ISDN and the Siemens.
Ultimately
this will help us move people from the legacy PBX to full SIP phones.
We have many Asterisk PBX's working well using the TE210P + ISDN30e
PRI, but
I am unsure how to get the legacy PBX working with the 2nd span of the
TE210P. I *assumed* that all I had to do was configure the 2nd span
with
pri_net and leave span 1 as pri_cpe and that would do the job, but
when I do
this and plug the siemens into span 2 I get a RED alarm on the span
2 and
that's about it. Any tips on the most likely configuration that
will work ?
What configuration of CAT5 should I be using to connect the legacy
PBX to
span 2 ? Straight, crossed, etc.
Many thanks in advanced !
James
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users