The easiest thing is to use the asterisk data base to store variables. Here
is a short example that I have where people can call in and set if they want
to be available or not for emergency calls. Below they call in and they set
if they want to opt in or out. In the dial plan it checks to see if the
opt'd in or out. If the opt'd in it calls them if not it goes to the next
prioroty in the dial plan.
exten => _*XX,1,Set(thierexten=${EXTEN:1}) ; They dial * plus thier
extension the system sets thier extension number to the variable thierexten
exten => _*XX,2,Goto(emergent-opt,s,1) ; System sends call to the setting
context (had to transfer to seperate context so that when the user presses 1
it wont interfear with my reg. dial plan)
[emergent-opt]
exten => s,1,Set(TIMEOUT(digit)=3)
exten => s,2,Set(TIMEOUT(response)=6)
exten => s,3,Background(techmast/to-opt-in-for-emergent) ; Tells them to
make a selection
exten => 1,1,Set(DB(emergent-opt-${thierexten}/selected)=1) ;If they press
one it sets that thier extension is avialable (it sets the value in the DB
to1)
exten => 1,2,Playback(techmast/been-optd-in-for-emergent) ; Tells them they
opt'd in
exten => 1,3,Hangup
exten => 2,1,Set(DB(emergent-opt-${thierexten}/selected)=0) ;If they press
two it sets that thier extension is avialable (it sets DB value to 1)
exten => 2,2,Playback(techmast/been-optd-out-for-emergent)
exten => 2,3,Hangup
exten => t,1,Goto(s,1)
exten => i,1,playback(pbx-invalid)
exten => i,2,goto(s,1,)
Now here is where I see if they want to be botherd or not:
Exten => 1234,1,GotoIf($[${DB(ssn-opt-10/selected)} = 1]?2:3) ;Checks if
the option is set to 1, if it is it goes to prioroty 2 which calls the
person
Exen => 1234,2,Dial(SIP/10) ; Calls the person
Exen => 1234,3,Playback(person-is-busy) ; If they pressed 2 above the value
was set to 0 and the go to if statement above sends the call to prioroty 3.
here we politly tell the call that the person is not available.
Also have a look here:
http://www.voip-info.org/wiki/view/Asterisk+database
Good luck !!
Dovid
----- Original Message -----
From: "Barry Fawthrop" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Sunday, August 06, 2006 9:03 AM
Subject: [asterisk-users] Using a DB for Configurations
Hi All
Is there a benefit to using a database to hold the extensions and sip
.conf information/configurations
or is using the standard Text file just as good and no benefit is
received?
Also how does one go about converting the text .conf files to a database,
and the have asterisk read it instead ?
Thank all
B
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
