Is there a maximum length of allowable CID information when using the AGI command SET CALLERID ?
We're having some issues with our outbound minutes provider, and I want to make sure it's not just a limitation on our side that's causing the problem. We set caller ID info based on the user's purchased (from us) DID, but for some reason, when it gets to the other end, it ends up being stripped of its first digit and dropped to only the next 10 digits. This is fine and dandy for domestic numbers like 1-212-555-1212... not so cool for International numbers like 81-393-555-666. The first gets truncated to 212-555-1212 which is READABLE to most (at least domestically). The second gets truncated to 139-355-5666 which is utterly unusable. These CIDs show up on the out going minutes provider's logging system as well, so it's either a problem when it leaves our system, or a problem when it arrives at theirs. We're not intentionally truncating anything, so I was wondering if this were a limitation of the AGI stuff, or if I should be pestering our provider to update their equipment to, at the VERY least, handle a standard E164 number from the US domestic area. N. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users