Rich Adamson <[EMAIL PROTECTED]> writes: > Sean Cook wrote: >> I have a sangoma 104d that is our main pbx now( legacy system died ). I >> have replaced every phone in the building and things are going very well. >> We have fax working well and calls are routing properly... All is well... >> >> Except for our support modems... we have support people that dial out with >> modems across our PRI's. These modems are attached to an Adtran 750 with 24 >> FXS's. I have disabled echo cancelation on the T1 that is connected to the >> Adtran but negotiation is still really rough. I am bridging across the same >> card and it isn't doing very well... has anyone done this with reasonably >> successful results? I am not looking for 56K I am looking for around 9600 >> to 14.4.. > > Can we assume that you've got the correct timing parameters set on the > 104d? (eg, are you sync'ing your 104d from the telco?) > > If not, get that corrected first as it makes a major difference with > modem calls.
That's the point! We had the same issues: modem calls dropping after a few minutes. Get at least wanpipe-beta7-2.3.4.tgz and set the reference clock to the telco line and set MASTER to this line. cu, Wolfgang _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users