Hello WE can provide you with budget GSM Gateway if you are interested? Sam
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tomislav Par?ina Sent: Tuesday, August 22, 2006 4:59 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] GSM gateway and FXO ATA Hi list! I'm trying to connect Analog GSM gateway (2N Ateus) with Asterisk 1.2.5 over Grandstream HT488 ATA. I have plugged gateway to FXO port of ATA. Incoming calls work the way I call GSM number and then I get DISA to call inside company. Outgoing call work well when I call VoIP number of ATA which calls gateway and then I dial number I wish to call over gateway. As I said, it works fine. Now I would like to dial ATA_number+number_I_wish_to_call so that I don't have to dial twice when I'm trying to establish outgoing call from company thru gateway. I have tried this but it doesn't work well. ; to dial outside thru GSM gateway exten => _456.,1,Dial(SIP/${EXTEN},30,tTD(${EXTEN:3})) exten => _456.,n,Hangup This is what I see on CLI: -- Executing Dial("SIP/577-104c", "SIP/4560989970434|30|tTD(248)") in new stack == Everyone is busy/congested at this time (1:0/0/1) -- Executing Hangup("SIP/577-104c", "") in new stack == Spawn extension (sip, 4560989970434, 2) exited non-zero on 'SIP/577-104c' Why asterisk thinks that gateway is busy when it's not? -- Tomislav ParĨina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 Mob.: +385(91)1212148 SIP: [EMAIL PROTECTED] e-mail: tparcina#lama.hr http://www.lama.hr _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users