Figured it out, so here it is for archives sake: I set the dtmf mode to "info" instead of "rfc2833" works with asterisk clients and sipura (Cisco gateway sends everything rtp-nte).
Thanks to all who helped. Ben -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Benjamin Lawetz Sent: August 29, 2006 1:08 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [asterisk-users] DTMF between cisco and sipura going throughasterisk Hello all, we're having an issue with DTMFs being sent to Sipura's. Calls are originating from a Cisco AS5300 being sent to asterisk which in turn sends it to the Sipura. Connected to the Sipura is a legacy PBX (or actually shows the same problem with a cheap answering machine). The DTMFs sent from the AS5300 aren't recognised by the legacy PBX. - DTMFs are recognised correctly on the asterisk (when we check voicemail) - The cisco is setup with dtmf-relay rtp-nte - in sip.conf the cisco and sipura are set to rfc2833 If I set the cisco in dtmf-relay rtp-cisco it works on the sipura, but not on the asterisk. Unfortunately I can only set one dtmf-relay mode on the cisco. Is there anything I can change on asterisk or sipura to get the sipura to work with the rtp-nte (or to get asterisk to work with the cisco-rtp)? Any hints can help, Thanks Ben _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users