It's an FXO module (I've got two FXS modules on the same card and they
work - I get a dialing tone from them), and the phone line works with
an ordinary phone.
dmesg gives:
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXS/DPO
Module 2: Installed -- AUTO FXO (UK mode)
Module 3: Not installed
Found a Wildcard TDM: Wildcard TDM400P REV E/F (3 modules)
Registered tone zone 4 (United Kingdom)
asterisk -c -vvv starts up with no errors or warnings and zap show
channels gives:
*CLI> zap show channels
Chan Extension Context Language MusicOnHold
pseudo from-pstn
1 from-internal
2 from-internal
3 from-pstn
cat /proc/zaptel/* gives:
asterisk1:/home/mark # cat /proc/zaptel/*
Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
1 WCTDM/0/0 FXOKS
2 WCTDM/0/1 FXOKS
3 WCTDM/0/2 FXSKS
4 WCTDM/0/3
My /etc/zaptel is:
asterisk1:/home/mark # cat /etc/zaptel.conf
# Autogenerated by ./genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
fxoks=1
fxoks=2
fxsks=3
# channel 4, WCTDM, no module.
# Global data
loadzone = uk
defaultzone = uk
My zapata.conf is:
asterisk1:/home/mark # cat /etc/zaptel.conf
# Autogenerated by ./genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
fxoks=1
fxoks=2
fxsks=3
# channel 4, WCTDM, no module.
# Global data
loadzone = uk
defaultzone = uk
asterisk1:/home/mark # more /etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file
;
; You need to restart Asterisk to re-configure the Zap channel
; CLI> reload chan_zap.so
; will reload the configuration file,
; but not all configuration options are
; re-configured during a reload.
[trunkgroups]
;
; Trunk groups are used for NFAS or GR-303 connections.
;
;
[channels]
;
context=test
usecallerid=yes
hidecallerid=no
immediate=no
#include zapata-channels.conf
asterisk1:/home/mark #
and my zaptel-channels.conf is:
asterisk1:/home/mark # more /etc/asterisk/zapata-channels.conf
; Autogenerated by ./genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
;
; Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
signalling=fxo_ks
callerid="Channel 1" <6001>
mailbox=6001
group=5
context=from-internal
channel => 1
signalling=fxo_ks
callerid="Channel 2" <6002>
mailbox=6002
group=5
context=from-internal
channel => 2
signalling=fxs_ks
callerid=asrecieved
mailbox=
group=0
context=from-pstn
cidsignalling=v23
cidstart=polarity
;;; line="3 WCTDM/0/2 FXSKS"
busydetect=no
channel => 3
; channel 4, WCTDM, no module.
asterisk1:/home/mark #
Any idea what more I can do before it drives me mad?
Thanks for any help
Mark
On 03/09/06, Tzafrir Cohen <[EMAIL PROTECTED]> wrote:
On Sun, Sep 03, 2006 at 11:05:35AM +0100, Mark Muffett wrote:
> I'm trying to get my TDM400P to work with a BT POT line. I've done
> everything I can think of to get the uk settings right (in
> zapata.conf, zaptel.conf and options for the wctdm driver) - and they
> all look right (ie uk like) and look like they are working when I try
> diagnostics with lspci, dsmsg, asterisk -c etc - but when I connect
> the FXO unit to the BT line it just makes it (the BT line) go
> permanently engaged. I'm tearing my hair out and about to chuck it
> all in the bin, but before I do, has anyone ever managed to get a
> TDM400P to work with a BT line and did they have any of these issues?
Please convince us that you have done that right.
For starters: does 'zap show channels' show a channel ?
Is the line OK? Does a normal phone work well?
What is the output of 'cat /proc/zaptel/*' ?
--
Tzafrir Cohen sip:[EMAIL PROTECTED]
icq#16849755 iax:[EMAIL PROTECTED]
+972-50-7952406 jabber:[EMAIL PROTECTED]
[EMAIL PROTECTED] http://www.xorcom.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
