Hi there, sorry I wasn't sure exactly where to start so didn't know what info to provide. Now that I know, here's the info
1) using a P4 w/HT 2) Using CentOS 4.3 with the 2.6.9-34.0.1-smp (Note, this was installed through an rpm, but the (*) and zaptel code is being compiled against the source of this) 3) I have tried it with and without ztdummy, and nothing changes. Although voicemail should have nothing to do with ztdummy, am I correct? 4) I have also tried with and without uncommenting the line for GSM optimisation for MMX processors line in the Makefile 5) I've also tried rebooting the machine with the line "acpi=ht" at the Kernel command line 6) Also tried strictly using one codec so as to avoid transcoding to see if that was it 7) I've tried booting into an SMP kernel without building (*) and zaptel for an smp kernel None of the above has helped. If I don't boot into an SMP kernel at all, it works fine. Also, at every start of (*), the "show translation" command shows different transcoding times without changing a single thing in the system in the way of config etc. Why is that? Oh also, note that this system is running inside of a Virtual Machine with 768 RAM and a 3.4GHz CPU although NO other VM is active on this VM server. Any ideas? Thx \R _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users