I have a 7970G with 5.0.3.0S Skinny (Load File: TERM70.5-0-3-0S) on
it and I'd like to get it up to 8.x.
- With the SEP<MAC>.cnf.xml in place (which was taken from voip-info
(http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+7970+SIP
under "This worked for me...")), I get "Load ID Incorrect" on the
phone display after it boots.
The loadInformation line in the SEP file reads like this:
<loadInformation>SIP70.8-0-4SR1S</loadInformation>
- If I remove the SEP file, the phone requests XmlDefault.cnf.xml. I
create the xml file based on the example from the same link above,
the phone grabs the file, but doesn't upgrade. It just sits in a
loop of: release IP => renew IP => look for SEP, fail => look for
XmlDefault, find and load XmlDefault => release IP... The
loadInformation line in the XmlDefault.cnf.xml file reads like this:
<loadInformation6 model="IP Phone 7970">SIP70.8-0-4SR1S</
loadInformation6>
- Here are TFTP server logs to illustrate that I'm using the correct
case'd XmlDefault.cnf.xml file:
Sep 10 21:57:55 bubbles tftpd[89195]: jalc7970.sip : read request
for SEP00131A4D39F4.cnf.xml: File not found
Sep 10 21:57:55 bubbles tftpd[89197]: jalc7970.sip : read request
for //XmlDefault.cnf.xml: success
- All the files from the .cop are 100% unmodified. I just tar -zxvf
cmterm-7970_7971-sip.8-0-4SR1.cop and the files are extracted into
the tftpd root directory, which is the same place the SEP and
XmlDefault file are located.
Anyone have any ideas?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
