Make those calls then check the CLI "sip show channels" and see if the channels are stay up
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frederik Fix Sent: Wednesday, September 13, 2006 8:35 PM To: asterisk-users@lists.digium.com Subject: [asterisk-users] QuadBRI and Zyxel Wifi phone stop working togetherafter 3 calls Hi, I have a strange problem that I have no idea how to debug: I have a Zyxel Prestige 2000W Wifi telephone that is connected to my Asterisk server which has a Junghanns.net QuadBRI card. I can make exactly 3 calls to the "outside" over the QuadBRI. Any calls after that fail with the log saying that all lines are busy. Turning the phone off and on solves the problem and I can make 3 calls again before it repeats. This problem does not occur when I make calls from my Cisco 7960G phones using SCCP or using eyebeam and SIP. Also making calls from the Zyxel through a cheap Cologne chipset ISDN card using zaphfc does not show this problem. I am using the following versions: Asterisk 1.2.9.1-BRIstuffed-0.3.0-PRE-1r Zyxel Prestige 2000W (version 1) Zyxel-Firmware: Wj.00.11 Any help is very much appreciated, Frederik _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
