Barton Hodges wrote: >> Hi, >> >> Does anyone know how to dial toll-free (800) numbers through FWD or >> Siphone? >> >> Using the configuration below, I can dial out to SIPphone.com users >> by simply dialing their number (1747XXXXXXX) and can dial out to FWD >> users by dialing 1383<FWD#>> >> >> However, when I dial 18005551212 through SIPphone, or through FWD >> (depending upon which line is selected in "; 800 Toll Free Numbers" >> below, I receive a "403 Forbidden" response. From what I've read, >> this might be due to outbound proxy authentication with FWD, but I >> don't believe that SIPphone.com is using proxy authentication. I can >> configure the phones to connect directly to both FWD and SIPphone.com >> and they work when dialing the 800 numbers. >> >> Any suggestions would be greatly appreciated. >> >> Barton >> >> --- >> >> sip.conf: >> >> [fwd] >> type=friend >> username=FWD# >> secret=secret >> host=fwd.pulver.com >> >> [sipphone] >> type=friend >> username=SIPPHONE# >> secret=secret >> host=proxy01.sipphone.com >> fromuser=SIPPHONE# >> fromdomain=proxy01.sipphone.com >> >> >> extensions.conf: >> >> ; 800 Toll Free Numbers >> exten =>> _1800XXXXXXX,1,SetCallerID(${CALLERIDNUM}) >> exten =>> _1800XXXXXXX,2,SetCIDName(${CALLERIDNUM}) >> exten =>> _1800XXXXXXX,3,Dial(SIP/[EMAIL PROTECTED]) >> ;exten =>> _1800XXXXXXX,3,Dial(SIP/[EMAIL PROTECTED]) >> exten =>> _1800XXXXXXX,4,Hangup >> >> ; SIPphone.com >> exten =>> _1747XXXXXXX,1,SetCallerID(${CALLERIDNUM}) >> exten =>> _1747XXXXXXX,2,SetCIDName(${CALLERIDNUM}) >> exten =>> _1747XXXXXXX,3,Dial(SIP/[EMAIL PROTECTED]) >> exten =>> _1747XXXXXXX,4,Hangup >> >> ; Free world dialup >> exten =>> _1393.,1,SetCallerID(${CALLERIDNUM}) >> exten =>> _1393.,2,SetCIDName(${CALLERIDNUM}) >> exten =>> _1393.,3,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) >> exten =>> _1393.,4,Hangup
[EMAIL PROTECTED] wrote: > You need to add "#" before dialing the rest of numbers. > > Ta > SJ Thanks for the response. If you mean changing the Dial line in extensions.conf to something like this, then I really don't see how that is correct, and it does not seem to work: ; 800 Toll Free Numbers exten =>> _1800XXXXXXX,1,SetCallerID(${CALLERIDNUM}) exten =>> _1800XXXXXXX,2,SetCIDName(${CALLERIDNUM}) exten =>> _1800XXXXXXX,3,Dial(SIP/[EMAIL PROTECTED]) ;exten =>> _1800XXXXXXX,3,Dial(SIP/[EMAIL PROTECTED]) exten =>> _1800XXXXXXX,4,Hangup _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users