Jay R. Ashworth wrote:
On Mon, Oct 09, 2006 at 12:01:02PM -0400, Doug Lytle wrote:
Yes, integrated CSU/DSU in software. The tools provided show now errors
on the line.
DSU maybe.
But if someone's figured out how to strip 130VDC off a copper pair and
convert a T-span to a DSX-1 in software, tell me about it, so I can
invest in them?
Cheers,
-- jra
From the A102 spec sheet:
* Available as *Single *T1/E1 port (A101) or *Dual *T1/E1 port
(A102) with daughterboard (as shown in photograph).
* Intelligent hardware: Downloadable Field Programmable Gate Array
programming with multiple operating modes:
* T1/E1 and fractional T1/E1, single channel HDLC per line
* Power: 520mA at +5v
* PCI 32 bit (5v and 64 bit (3.3v) compatible.
* Temperature range: 0 - 45C.
* All set-up and configuration is in software or by machine BIOS.
* DSU/CSU set up entirely in software.
* Line decoding: HDB3, AMI, B8ZS.
* Framing: CRC4, non-CRC4, ESF, D4.
* Clocking mode: Normal , Master.
* Software controlled DSU/CSU test modes.
* Remote monitoring of card and CSU/DSU operation.
* Dimensions: 2U Form factor: 120mm x 55 mm.
--
Ben Franklin quote:
"Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve neither Liberty nor Safety."
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
