If your Dial() cmd has an 'r' in the options, could it be that the
ringing you're hearing is asterisk-generated, and the remote side
actually is busy? Have you tried turning busydetect=no in zapata.conf?
Moj
Eloy Gomez wrote:
Hi all..
I have a problem with my asterisk installation. I'm using a Wilcard
X100P clone in Spain. Incoming calls work fine, but when I make a
outgoing call, a hear the ringing, and the peer phone ring, when the
peer answer, asterisk hangup the call, or say busy.
This is my conf:
zaptel.conf:
---------
loadzone = es
defaultzone=es
fxsks=1
zapata.conf
----------
[channels]
signalling=fxs_ks
busydetect=yes
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
callprogress=yes
progzone=es
context = contexto
group = 1
channel => 1
And this is the asterisk log:
-- Executing Dial("SIP/200-4803", "ZAP/1/966736800|90") in new stack
-- Called 1/966736800
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing PlayTones("SIP/200-4803", "busy") in new stack
-- Executing Wait("SIP/200-4803", "10") in new stack
== Spawn extension (indeos, 0966736800, 103) exited non-zero on
'SIP/200-4803'
Thanks all
Eloy.
--
Mojo <[EMAIL PROTECTED]>
Office Manager, Horan & Company, LLC
(907) 747-6666 x112
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
