On Tue, Oct 10, 2006 at 11:43:09PM +0100, David Bath wrote: > Hi All, > > > > I've tried to find the solution to this, but sadly met with failure. > I've got an asterisk box with two X100P's in, and both cards have the > same strange problem. After 2min 40seconds (always: within +/- 1sec) > they drop an outbound call. Inbound calls are not affected... they stay > up as long as required. >
Do you use busydetect? Any chance that there's a busy tone there? > > > I've seen a fair bit of chatter about similar kinds of problems > sometimes being related to callprogess detecting false hang-ups, so I've > made sure this is disabled in Zapata.conf but it seems to have had no > effect. > > > > I was running a slightly older version of zaptel/asterisk (1.2.0) and > I've upgraded to the lastest build, but also with no success. Details, pleasse: zapata.conf logs from a call (set verbose to at least 3, and enable full in logger.conf). -- Tzafrir Cohen sip:[EMAIL PROTECTED] icq#16849755 iax:[EMAIL PROTECTED] +972-50-7952406 jabber:[EMAIL PROTECTED] [EMAIL PROTECTED] http://www.xorcom.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
