You were right! changing the Calling Search Space for the SIP trunk worked!.
Many thanks for your help Eric. Now I'm fine tuning the application, but the communication with Cisco works pretty fione so far.
Alyed
Return-Path: <[EMAIL PROTECTED]> Wed Oct 11 10:57:00 2006
Received: from rwcrmhc15.comcast.net [204.127.192.85] by maila11.webcontrolcenter.com with SMTP;
Wed, 11 Oct 2006 10:57:00 -0700
I think SIP is working on your CM becuase it sends a 404 message, I think your problem is the CM cant find the endpoint in its database.
I am running CM 4.1(3)sr1, and under where you enter the device name there is a section called, "Call Routing Information". There you should see a field called "Calling Search Space".
You should select the Calling Search space that the destination endpoints are in. Or if you want to create a new calling search space, and then give them access to each other you can do that.
In the attachment, I circled the calling search space field I see on my Add NEW SIP TRUNK PAGE.
Hope this helps.
-------------- Original message ----------------------
From: "Alyed Tzompa"
>
> Many thanks for your interest :)
>
> In the Cisco the only thing I've donde so far is enable a SIP trunk and pointing
> it towards the IP the Asterisk has.
>
> For this I mean:
>
> Device --> Trunk --> Add a new Trunk
>
> Seleccted for Trunk Type "SIP trunk"
>
> Selected for Device Protocol "SIP"
>
> Entered for
> Device Name "asterisk"
>
> Entered for
> Description "asterisk"
>
> Selected the appropriate device for Device Pool
>
> Entered for Destination Address "192.168.1.20" (Asterisk's IP)
>
> Selected for Outgoing Transport Type "UDP"
>
> Entered the appropriate routing patterns
>
> clicked on "Insert"
>
> in sip.conf I'm using the same config shown in th VoIP-info wiki:
>
> [cisco]
>
> type=friend
>
> context=cisco-test
>
> host=192.168.1.100
>
> disallow=all
>
> allow=ulaw
>
> allow=alaw
>
> nat=no
>
> canreinvite=yes
>
> qualify=yes
>
> Regards,
>
> Alyed
>
> ----------------------------------------
> Return-Path:
> Received: from rwcrmhc13.comcast.net [216.148.227.153] by
> maila11.webcontrolcenter.com with SMTP;
> Tue, 10 Oct 2006 16:24:58 -0700
>
> I can check for you tomorrow and send you screen shots.
>
> How do you have the asterisk configured on the CM. Please send me some
> configuration information.
>
> -Eric
> -------------- Original message ----------------------
> From: "Alyed Tzompa"
> >
> > Do you know where in the Cisco menu can I
> > check out this "calling search spaces" you point out? I don't have
> > access to it right now so want to know if this is a configurable menu
> > in the web interface or will need to ask for expert (and expensive)
> > Cisco assistance.
> >
> > Alyed
> >
> > ----------------------------------------
> > Return-Path: Tue Oct 10 11:04:09 2006
> > Received: from rwcrmhc11.comcast.net [216.148.227.151] by
> > maila11.webcontrolcenter.com with SMTP;
> > Tue, 10 Oct 2006 11:04:09 -0700
> >
> > Looks
> > like the CallManager is unable to find the endpoint in its database.
> > Make sure asterisk trunk on the Call manager is in the same "calling
> > Search Space" as the phones are in, or make sure there is access
> > between the "calling search spaces"
> >
> > -Eric
> >
> > -------------- Original message ----------------------
> > From: "Alyed Tzompa"
> > >
> > > Hi!
> > >
> > > I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've
> followed
> > > the info in
> > >
> > >
> >
> http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integrat
> > > ion
> > >
> > > but still not able to make Asterisk communicate with Cisco. I keep on
> > receiving
> > > ---
> > > SIP/2.0 400 Bad Request - 'Malformed/Missing URL'
> > > --- and ---
> > >
> > > SIP/2.0 404 Not Found ---
> > > messages everytime I send a call. Had play a lot with the way
> > > SIP messages are sent to the Cisco, but always been unseccessful.
> > >
> > > I'm begining to think this is more of a Cisco config problem than
> > > Asterisk, has anyone had a similar problem??? I'm not a Cisco expert so
> > > dun't know if I need to "enable" SIP messageing/reception in the Cisco.
> > >
> > > Regards,
> > >
> > > Alyed
> > >
> > >
> > >
> >
> >
> >
>
>
>
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
