Dumpolid Exeplish wrote:
Hello,
i have call time irregularites in my asterisk CDR. I a currently using a
mysqly backent to save CDR records and use this to generate bills at the
end of each month. However, my users are complaining that they gety
charged for even uncompleted calls ( i.e. calls they make whaich have
already be setup but canclled). i have noticed that only 'AWNSERED' and
'Busy' show up in my call disposition colume. I have also noticed that
both the call duration and the billsec are always equal. here is my
setup below
<PSTN va E1> <========> (<Primary Asterisk>) <=====<Sip and IAX trunks>
<============> (<Secondary PBX>)
Clients are connected to the Secondary PBX. this pbx handles
registration of all clents. The billing irregularities happen on the
Secondary PBX. When a call is maked from the Secondary and it is routed
across the trunks, call disposition always registeres 'AWNSERED', unless
the Primary PBX sends back a busy signal. the duration and billsecs are
always equla. this means that the user gets billed for ring time, and
calls disconnected from the Secondary PBX
Can someone help me out here ?
Hi,
I have not had this particular problem, but I had it where my billsec were wrong for some other
reason. Try callprogress=yes in zapata.conf, although I dont even think this will help, but you can
try.
--
thanks,
yusuf
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users