On Mon, Oct 23, 2006 at 12:52:49PM +0100, Andy Green wrote: > Hello, > > I am experiencing problems with a ZAP channel not being released after a > voicemail has been left. > > I have 2 analogue extns from an Alcatel PBX wired into 2 FXO ports on my * > box. > > If I make a call from an Alcatel extn and route it to a SIP extension on my > * everything works as expected, at the end of the call the ZAP channel is > released. > > As soon as I activate VM on the SIP extension VM can be left but the inbound > ZAP channel is not released until 4 and a half minutes later (always).
Who is hanging up the call? Asterisk or the Alcatel PBX? If the Alcatel PBX: how does it notify the hangup? > > Users are simply putting the alcatel extn handset down to end the call (no > key pad presses, no DTMF sent as * vm prompt suggests) > > During this time the SIP extension cannot receive any other calls from the > Alcatel (the ZAP channel is busy). > > Am I right in thinking that the ZAP channel is timing out and releasing > itself on a predetermined silence period (hence 4 and half minutes every > time) > > If this is the case where do I change the ZAP (or is it VM) silence detect > setting -- Tzafrir Cohen iax:[EMAIL PROTECTED]/tzafrir icq#16849755 mailto:[EMAIL PROTECTED] +972-50-7952406 jabber:[EMAIL PROTECTED] http://www.xorcom.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
