Hi all, We have tested both tdm400 and BRI 1 port HFC based with mISDN driver and with both cards we have the same problem... so probably it's due to our misconfiguration, but we couldn't find anything useful on google.
With TDM400 we can place and receive calls, but if we receive a call from TDM400 and we reject it from a sip phone , asterisk send the hangup but the line continue to stay up. Even if we doesn't reject the call after the timeout on dial application, asterisk send the hangup signal, but the line doesn't go down. This is an example of the dialplan.conf [line-in] exten => s, 1, Dial(SIP/test, 10) exten => s, 2, Congestion exten => s, 102, Busy The only solution we have found is to add the command Answer before the Dial, but if someone call us , and we reject the call, he pay for the call. Any suggestion/hint is appraciated. Follow the configurations of zapata and zaptel: ; ; Zapata telephony interface [channels] ; ; Default language ; language=it ; ; Default context ; echocancel=yes echocancelwhenbridged=yes echotraining=400 rxgain=0.0 txgain=5.0 ;hanguponpolarityswitch=yes ;answeronpolarityswitch=yes group => 1 signalling=fxs_ks context = line-in channel=>1 # # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # fxsks=1 loadzone=it defaultzone=it _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users