Skip to site navigation (Press enter)

RE: [asterisk-users] Polycom autoprovision behind a NAT

Russ Beaupre Mon, 06 Nov 2006 18:56:11 -0800

I'm not sure. We ended up putting in a d-link router to get around the ftp problem. In most of our sites we have netscreen 5gt routers and they work fine.

-----Original Message-----
From: "Curt Shaffer" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com>
Date: Mon, 6 Nov 2006 20:35:27 -0600
Subject: RE: [asterisk-users] Polycom autoprovision behind a NAT

If you want that is fine. But as I mentioned when I put the phone on the same subnet as the ftp server with no NAT it works like a charm. Is there something in the config that deals with NAT traversal with regards to how it is provisioned?

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Russ Beaupre
Sent: Monday, November 06, 2006 8:26 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Polycom autoprovision behind a NAT

I if you like, I can take a config file(s) and put up over here as a test. Our ftp is working. It might be informative.

-----Original Message-----
From: "Curt Shaffer" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com>
Date: Mon, 6 Nov 2006 20:17:07 -0600
Subject: RE: [asterisk-users] Polycom autoprovision behind a NAT

To be honest I don’t know for sure. I am using VSFTPD. I have never needed to set this with setups I have used it before and there is nothing in the config that says passive. So I’m guessing that its not. After you asked this I have googled passive FTP and it seems to be on the money as to what is going on so I will try passive and see if that helps. Thanks!

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Russ Beaupre
Sent: Monday, November 06, 2006 7:45 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom autoprovision behind a NAT

I can confirm that the linksys routers cause ftp problems. Is your FTP server set to use pasive mode?

-rb

-----Original Message-----
From: "Curt Shaffer" <[EMAIL PROTECTED]>
To: "' Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com>
Date: Mon, 6 Nov 2006 19:19:48 -0600
Subject: [asterisk-users] Polycom autoprovision behind a NAT

I am having an issue with doing FTP auto provisioning of Polycom 501’s when they are behind a NAT. If I put the phone on the same subnet as the provision server it loads the configs and changes fine but as soon as I put in behind a NAT it comes up with cannot contact boot server. I have tried behind and replicated this behind a PIX 501, a Linksys SOHO router and a Motorolla SOHO router.

Any ideas?

Curt

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --


asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users