Mohamed A. Gombolaty wrote:
Dear All,
I have an asterisk server version 1.2.12.1 along with trixbox and I
am having this nasty problem, I have a TE200P and have an E1 pri
attached to it and zttool says it's OK, I have configured the whole
31 channels into one group as follow:
Zapata-auto.conf:
callerid=asreceived
signalling=pri_cpe
switchtype=euroisdn
context=from-zaptel
group=0
channel=>1-15,17-31
/etc/zaptel.conf:
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
Sounds like you need to fiddle around with your PRI Dialplan, test these
out in zapata.conf. I am sure one of them will work for you.
;pridialplan=national
;
; PRI Local Dialplan: Only RARELY used for PRI (sets the calling
number's numbering plan)
;
; unknown: Unknown
; private: Private ISDN
; local: Local ISDN
; national: National ISDN
; international: International ISDN
;
;prilocaldialplan=national
;
; PRI callerid prefixes based on the given TON/NPI (dialplan)
; This is especially needed for euroisdn E1-PRIs
;
; sample 1 for Germany
;internationalprefix = 00
;nationalprefix = 0
;localprefix = 0711
;privateprefix = 07115678
;unknownprefix =
;
; sample 2 for Germany
;internationalprefix = +
;nationalprefix = +49
;localprefix = +49711
;privateprefix = +497115678
;unknownprefix =
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
