Hi, I've not yet used a TDM400, only a 2400. Silly question first, are you connecting the power cable? I don't know what happens if you leave it off.
I found that if I have the zaptel & asterisk services enabled, the card/drivers do not initialise correctly. To get my system working, I ended up with the services stopped. I added lines in rc.local to remove (rmmod) the card driver & zaptel modules, then start zaptel, a delay while other things are started, then start asterisk. I'm running Centos 4.4 so the exact commands may be different - eg. I use 'service zaptel start' to start zaptel, which then loads all the appropriate modules. This sequence seems to give an absolutely reliable startup (so far...) The other minor problem I had was getting the settings mixed up in /etc/zaptel.conf I initially missed the bit of the docs that said to use fxsks for the FXO modules connected to outside lines & use fxoks for the FXS modules on local extensions. Hope this is some help, Robert Jenkins. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Gustavo Felisberto > Sent: 14 November 2006 21:43 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Problem with FXS ports of TDM400P > > Gustavo Felisberto wrote: > > I just received two TDM400P cards, but I'm having problems > with them. > > > > The full info is at: > > http://pastebin.com/824079 > > > > Extra, I'm using : > > > > libpri-1.2.3 > > zaptel-1.2.10 > > > > On a x86 stable Gentoo box. > > Kernel: 2.6.17 > > gcc-4.1.1, glibc-2.4-r4 > > > > Is that an hardware problem? Should I try the other card? > > > > I tried the other card and the problem is still there. REALY > NEED HELP!!!! > > -- > Gustavo Felisberto > (HumpBack) > Web: http://dev.gentoo.org/~humpback > Blog: http://blog.felisberto.net/ > ------------ > It's most certainly GNU/Linux, not Linux. Read more at > http://www.gnu.org/gnu/why-gnu-linux.html . > ------------- > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users