Check with your telco on the "Glare" setting. They probably have Glare set to "CO Yields" which tells their switch to 'yield' to your switch/pbx when negotiating which channel to use. We ran into this problem with our PRI and an older phone system that did not give nearly the amount of insight (logs) as to what the problem might be.
It sounds like you probably want them to set it to "CPE Yields". On 11/21/06, Matt <[EMAIL PROTECTED]> wrote:
We are doing PRIs into T4XXP cards. When I call out things are fine... however tonight sometimes on inbound calls I'd get: chan_zap.c: Duplicate setup requested on channel 0/1 already in use on span 1 in the full debug log followed by a fast busy signal on the calling parties end. Anyone know what would cause that? _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users