On Mon, Nov 27, 2006 at 09:44:08AM +0200, Kevin Boddy wrote: > > I've got a few 8 port Junghanns BRI ISDN cards. Dialling in and out is > working fine but the Telco's busy or invalid number indications are not > being passed through to the user. I have priindication=passthrough in my > zapata.conf but this doesn't seem to help. I'm using Asterisk 1.2.13, > Zaptel 1.2.10 and Bristuff 0.3.0-PRE-1v. This is happening on three > different boxes that I've setup with the same ISDN cards at three > different sites. If the number is busy or invalid the Asterisk box > responds with "all-circuits-are-busy" indication instead of what the > Telco's is actually sending. This is causing major frustration with the > users as they think the lines are always busy or broken on the Asterisk > box. Any help would be greatly appreciated.
This is what I do: exten => s,1,Dial(Zap/g1/${MACRO_EXTEN}) exten => s,n,Goto(s-${DIALSTATUS},1) exten => s,n,Congestion exten => s-ANSWER,1,Hangup exten => s-CONGESTION,1,Playback(invalid) exten => s-CONGESTION,n,Congestion exten => s-CANCEL,1,Hangup exten => s-BUSY,n,Busy exten => s-CHANUNAVAIL,1,Playback(invalid) exten => s-CHANUNAVAIL,n,Congestion _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users