I'm having problems installing ztdummy on my CentOS-2.6.16-rc6/Asterisk-1.2.11 datacenter server (no ZAP HW, SIP only to PSTN). I unpacked the kernel sources and headers in a directory, made (but not re/installed) the kernel, unpacked the zaptel-1.2.11 tarball, then went thru the make sequence. It seemed to proceed OK (without errors, just some warnings), but didn't seem to result in a loadable ztdummy kernel module. Details appended, followed by a complete (failed) install session transcript:
------------------------------------------------------------------------- # cd <path-to-zaptel-1.2.11-source> # export KSRC=<path-to-kernel-source-root-dir> # make clean # make config [... series of shell script conditionals apparently executed OK ...] # make linux26 [... series of CC/LD reports, some warnings, no errors ...] # make install [... series of INSTALL messages, same warnings from (make linux26), no errors ...] # modprobe ztdummy FATAL: Module ztdummy not found. FATAL: Error running install command for ztdummy # modprobe zaptel FATAL: Module zaptel not found. ------------------------------------------------------------------------- (make linux26) generated some warnings about various usb_*_dev symbols undefined in [xpp,wcusb]/*.ko, but no actual errors. (make install) repeated those warnings. (modprobe ztdummy) finished with ------------------------------------------------------------------------- Building /etc/modprobe.d/zaptel... *** *** WARNING: *** If you had custom settings in /etc/modprobe.d/zaptel, *** they have been moved to /etc/modprobe.d/zaptel.bak. [...] ------------------------------------------------------------------------- but seemed to complete without errors. (make install) included a line ------------------------------------------------------------------------- INSTALL <zaptel-1.2.11-source-root-dir>/ztdummy.ko ------------------------------------------------------------------------- but no success. Complete (failed) install session transcript: ------------------------------------------------------------------------- # make clean rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttool zttest fxotune rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f zonedata.lo tonezone.lo libtonezone.so *.lo make -C <kernel-source-root-dir> SUBDIRS=<zaptel-1.2.11-source-root-dir> clean make[1]: Entering directory `<kernel-source-root-dir>' CLEAN <zaptel-1.2.11-source-root-dir>/wct4xxp CLEAN <zaptel-1.2.11-source-root-dir>/.tmp_versions make[1]: Leaving directory `<kernel-source-root-dir>' rm -rf .tmp_versions rm -f gendigits tones.h rm -f libtonezone* rm -f tor2ee rm -f fxotune rm -f core rm -f ztcfg-shared fxstest rm -rf misdn* rm -rf mISDNuser* # make config if [ -d /etc/rc.d/init.d ]; then \ install -D -m 755 zaptel.init /etc/rc.d/init.d/zaptel; \ //sbin/chkconfig --add zaptel; \ elif [ -d /etc/init.d ]; then \ install -D -m 755 zaptel.init /etc/init.d/zaptel; \ //sbin/chkconfig --add zaptel; \ fi if [ -d /etc/default ] && [ ! -f /etc/default/zaptel ]; then \ install -D -m 644 zaptel.sysconfig /etc/default/zaptel; \ fi if [ -d /etc/sysconfig ] && [ ! -f /etc/sysconfig/zaptel ]; then \ install -D -m 644 zaptel.sysconfig /etc/sysconfig/zaptel; \ fi if [ -d /etc/sysconfig/network-scripts ]; then \ install -D -m 755 ifup-hdlc /etc/sysconfig/network-scripts/ifup-hdlc; \ fi # make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits > tones.h cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" makefw.c -o makefw ./makefw tormenta2.rbt tor2fw > tor2fw.h Loaded 69900 bytes from file ./makefw pciradio.rbt radfw > radfw.h Loaded 42096 bytes from file ZAPTELVERSION="1.2.11" build_tools/make_version_h > version.h.tmp if cmp -s version.h.tmp version.h ; then echo; else \ mv version.h.tmp version.h ; \ fi rm -f version.h.tmp cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DBUILDING_TONEZONE -o zonedata.lo zonedata.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DBUILDING_TONEZONE -o tonezone.lo tonezone.c ar rcs libtonezone.a zonedata.lo tonezone.lo cc -o ztcfg ztcfg.o libtonezone.a -lm cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o torisatool.o torisatool.c cc -o torisatool torisatool.o cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztmonitor.o ztmonitor.c cc -o ztmonitor ztmonitor.o cc -o ztspeed.o -c ztspeed.c cc -o ztspeed ztspeed.o cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zttool.o zttool.c cc -o zttool zttool.o -lnewt cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" zttest.c -o zttest cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o fxotune.o fxotune.c cc -o fxotune fxotune.o -lm <kernel-source-root-dir> make -C <kernel-source-root-dir> SUBDIRS=<zaptel-1.2.11-source-root-dir> modules make[1]: Entering directory `<kernel-source-root-dir>' CC [M] <zaptel-1.2.11-source-root-dir>/zaptel.o <zaptel-1.2.11-source-root-dir>/zaptel.c:188: warning: ‘fcstab’ defined but not used CC [M] <zaptel-1.2.11-source-root-dir>/tor2.o CC [M] <zaptel-1.2.11-source-root-dir>/torisa.o <zaptel-1.2.11-source-root-dir>/torisa.c:1147: warning: ‘set_tor_base’ defined but not used CC [M] <zaptel-1.2.11-source-root-dir>/wcusb.o CC [M] <zaptel-1.2.11-source-root-dir>/wcfxo.o CC [M] <zaptel-1.2.11-source-root-dir>/wctdm.o CC [M] <zaptel-1.2.11-source-root-dir>/wctdm24xxp.o CC [M] <zaptel-1.2.11-source-root-dir>/ztdynamic.o CC [M] <zaptel-1.2.11-source-root-dir>/ztd-eth.o <zaptel-1.2.11-source-root-dir>/ztd-eth.c:185: warning: initialization from incompatible pointer type CC [M] <zaptel-1.2.11-source-root-dir>/wct1xxp.o CC [M] <zaptel-1.2.11-source-root-dir>/wcte11xp.o CC [M] <zaptel-1.2.11-source-root-dir>/pciradio.o <zaptel-1.2.11-source-root-dir>/pciradio.c: In function ‘pciradio_interrupt’: <zaptel-1.2.11-source-root-dir>/pciradio.c:508: warning: ‘byte2’ is used uninitialized in this function CC [M] <zaptel-1.2.11-source-root-dir>/ztd-loc.o CC [M] <zaptel-1.2.11-source-root-dir>/ztdummy.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/base.o <zaptel-1.2.11-source-root-dir>/wct4xxp/vpm450m.h:33: warning: ‘oct064_firmware’ defined but not used <zaptel-1.2.11-source-root-dir>/wct4xxp/vpm450m.h:34: warning: ‘oct128_firmware’ defined but not used HOSTCC <zaptel-1.2.11-source-root-dir>/wct4xxp/fw2h <zaptel-1.2.11-source-root-dir>/wct4xxp/fw2h <zaptel-1.2.11-source-root-dir>/wct4xxp/OCT6114-128D.ima <zaptel-1.2.11-source-root-dir>/wct4xxp/vpmoct128_fw.h <zaptel-1.2.11-source-root-dir>/wct4xxp/fw2h <zaptel-1.2.11-source-root-dir>/wct4xxp/OCT6114-64D.ima <zaptel-1.2.11-source-root-dir>/wct4xxp/vpmoct064_fw.h CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/vpm450m.o <zaptel-1.2.11-source-root-dir>/wct4xxp/vpm450m.h:33: warning: ‘oct064_firmware’ defined but not used <zaptel-1.2.11-source-root-dir>/wct4xxp/vpm450m.h:34: warning: ‘oct128_firmware’ defined but not used CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_adpcm_chan.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_channel.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_chip_open.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_chip_stats.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_conf_bridge.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_debug.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_events.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_interrupts.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_memory.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_miscellaneous.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_mixer.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_phasing_tsst.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_playout_buf.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_remote_debug.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tlv.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tone_detection.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tsi_cnct.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tsst.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/apilib/bt/octapi_bt0.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/apilib/largmath/octapi_largmath.o CC [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/../oct612x/apilib/llman/octapi_llman.o LD [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/wct4xxp.o CC [M] <zaptel-1.2.11-source-root-dir>/xpp/card_fxo.o CC [M] <zaptel-1.2.11-source-root-dir>/xpp/slic.o CC [M] <zaptel-1.2.11-source-root-dir>/xpp/card_fxs.o CC [M] <zaptel-1.2.11-source-root-dir>/xpp/xbus-core.o CC [M] <zaptel-1.2.11-source-root-dir>/xpp/xpp_zap.o <zaptel-1.2.11-source-root-dir>/xpp/xpp_zap.c:187:2: warning: #warning "xpp_timer must be sampled EXACTLY 1000/per second" <zaptel-1.2.11-source-root-dir>/xpp/xpp_zap.c:187:2: warning: #warning "xpp_timer must be sampled EXACTLY 1000/per second" CC [M] <zaptel-1.2.11-source-root-dir>/xpp/xproto.o CC [M] <zaptel-1.2.11-source-root-dir>/xpp/card_global.o LD [M] <zaptel-1.2.11-source-root-dir>/xpp/xpp.o CC [M] <zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.o LD [M] <zaptel-1.2.11-source-root-dir>/xpp/xpd_fxs.o LD [M] <zaptel-1.2.11-source-root-dir>/xpp/xpd_fxo.o Building modules, stage 2. MODPOST *** Warning: "usb_deregister_dev" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_register_dev" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_reset_device" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_buffer_free" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_submit_urb" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_free_urb" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_buffer_alloc" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_alloc_urb" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_deregister" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_register_driver" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_set_interface" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! *** Warning: "usb_control_msg" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! *** Warning: "usb_deregister" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! *** Warning: "usb_register_driver" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! *** Warning: "usb_submit_urb" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! CC <zaptel-1.2.11-source-root-dir>/pciradio.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/pciradio.ko CC <zaptel-1.2.11-source-root-dir>/tor2.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/tor2.ko CC <zaptel-1.2.11-source-root-dir>/torisa.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/torisa.ko CC <zaptel-1.2.11-source-root-dir>/wcfxo.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/wcfxo.ko CC <zaptel-1.2.11-source-root-dir>/wct1xxp.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/wct1xxp.ko CC <zaptel-1.2.11-source-root-dir>/wct4xxp/wct4xxp.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/wct4xxp/wct4xxp.ko CC <zaptel-1.2.11-source-root-dir>/wctdm.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/wctdm.ko CC <zaptel-1.2.11-source-root-dir>/wctdm24xxp.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/wctdm24xxp.ko CC <zaptel-1.2.11-source-root-dir>/wcte11xp.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/wcte11xp.ko CC <zaptel-1.2.11-source-root-dir>/wcusb.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/wcusb.ko CC <zaptel-1.2.11-source-root-dir>/xpp/xpd_fxo.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/xpp/xpd_fxo.ko CC <zaptel-1.2.11-source-root-dir>/xpp/xpd_fxs.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/xpp/xpd_fxs.ko CC <zaptel-1.2.11-source-root-dir>/xpp/xpp.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/xpp/xpp.ko CC <zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko CC <zaptel-1.2.11-source-root-dir>/zaptel.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/zaptel.ko CC <zaptel-1.2.11-source-root-dir>/ztd-eth.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/ztd-eth.ko CC <zaptel-1.2.11-source-root-dir>/ztd-loc.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/ztd-loc.ko CC <zaptel-1.2.11-source-root-dir>/ztdummy.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/ztdummy.ko CC <zaptel-1.2.11-source-root-dir>/ztdynamic.mod.o LD [M] <zaptel-1.2.11-source-root-dir>/ztdynamic.ko make[1]: Leaving directory `<kernel-source-root-dir>' # make install ZAPTELVERSION="1.2.11" build_tools/make_version_h > version.h.tmp if cmp -s version.h.tmp version.h ; then echo; else \ mv version.h.tmp version.h ; \ fi rm -f version.h.tmp <kernel-source-root-dir> make -C <kernel-source-root-dir> SUBDIRS=<zaptel-1.2.11-source-root-dir> modules make[1]: Entering directory `<kernel-source-root-dir>' Building modules, stage 2. MODPOST *** Warning: "usb_deregister_dev" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_register_dev" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_reset_device" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_buffer_free" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_submit_urb" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_free_urb" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_buffer_alloc" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_alloc_urb" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_deregister" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_register_driver" [<zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko] undefined! *** Warning: "usb_set_interface" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! *** Warning: "usb_control_msg" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! *** Warning: "usb_deregister" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! *** Warning: "usb_register_driver" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! *** Warning: "usb_submit_urb" [<zaptel-1.2.11-source-root-dir>/wcusb.ko] undefined! make[1]: Leaving directory `<kernel-source-root-dir>' cc -shared -Wl,-soname,libtonezone.so.1.0 -lm -o libtonezone.so zonedata.lo tonezone.lo build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules Not installing firmware because we are not using hotplug firmware install -D -m 755 ztcfg /sbin/ztcfg if [ -f sethdlc-new ]; then \ install -D -m 755 sethdlc-new /sbin/sethdlc; \ elif [ -f sethdlc ]; then \ install -D -m 755 sethdlc /sbin/sethdlc ; \ fi if [ -f zttool ]; then install -D -m 755 zttool /sbin/zttool; fi for x in zaptel.ko tor2.ko torisa.ko wcusb.ko wcfxo.ko wctdm.ko wctdm24xxp.ko ztdynamic.ko ztd-eth.ko wct1xxp.ko wcte11xp.ko pciradio.ko ztd-loc.ko ztdummy.ko; do \ rm -f /lib/modules/2.6.16-rc6-060427a/extra/$x ; \ done; \ make -C <kernel-source-root-dir> SUBDIRS=<zaptel-1.2.11-source-root-dir> INSTALL_MOD_PATH= INSTALL_MOD_DIR=misc modules_install; make[1]: Entering directory `<kernel-source-root-dir>' INSTALL <zaptel-1.2.11-source-root-dir>/pciradio.ko INSTALL <zaptel-1.2.11-source-root-dir>/tor2.ko INSTALL <zaptel-1.2.11-source-root-dir>/torisa.ko INSTALL <zaptel-1.2.11-source-root-dir>/wcfxo.ko INSTALL <zaptel-1.2.11-source-root-dir>/wct1xxp.ko INSTALL <zaptel-1.2.11-source-root-dir>/wct4xxp/wct4xxp.ko INSTALL <zaptel-1.2.11-source-root-dir>/wctdm.ko INSTALL <zaptel-1.2.11-source-root-dir>/wctdm24xxp.ko INSTALL <zaptel-1.2.11-source-root-dir>/wcte11xp.ko INSTALL <zaptel-1.2.11-source-root-dir>/wcusb.ko INSTALL <zaptel-1.2.11-source-root-dir>/xpp/xpd_fxo.ko INSTALL <zaptel-1.2.11-source-root-dir>/xpp/xpd_fxs.ko INSTALL <zaptel-1.2.11-source-root-dir>/xpp/xpp.ko INSTALL <zaptel-1.2.11-source-root-dir>/xpp/xpp_usb.ko INSTALL <zaptel-1.2.11-source-root-dir>/zaptel.ko INSTALL <zaptel-1.2.11-source-root-dir>/ztd-eth.ko INSTALL <zaptel-1.2.11-source-root-dir>/ztd-loc.ko INSTALL <zaptel-1.2.11-source-root-dir>/ztdummy.ko INSTALL <zaptel-1.2.11-source-root-dir>/ztdynamic.ko make[1]: Leaving directory `<kernel-source-root-dir>' if ! [ -f wcfxsusb.o ]; then \ rm -f /lib/modules/2.6.16-rc6-060427a/misc/wcfxsusb.o; \ fi; \ rm -f /lib/modules/2.6.16-rc6-060427a/misc/wcfxs.o install -D -m 755 libtonezone.so /usr/lib/libtonezone.so.1.0 [ `id -u` = 0 ] && /sbin/ldconfig || : rm -f /usr/lib/libtonezone.so ln -sf libtonezone.so.1.0 \ /usr/lib/libtonezone.so.1 ln -sf libtonezone.so.1.0 \ /usr/lib/libtonezone.so if [ -x /usr/sbin/sestatus ] && (/usr/sbin/sestatus | grep "SELinux status:" | grep -q "enabled") ; then restorecon -v /usr/lib/libtonezone.so; fi install -D -m 644 zaptel.h /usr/include/linux/zaptel.h install -D -m 644 torisa.h /usr/include/linux/torisa.h install -D -m 644 tonezone.h /usr/include/tonezone.h install -m 644 doc/ztcfg.8 /usr/share/man/man8 install -m 644 doc/zttool.8 /usr/share/man/man8 [ `id -u` = 0 ] && /sbin/depmod -a 2.6.16-rc6-060427a || : [ -f /etc/zaptel.conf ] || install -D -m 644 zaptel.conf.sample /etc/zaptel.conf build_tools/genmodconf linux26 "" "tor2 torisa wcusb wcfxo wctdm wctdm24xxp ztdynamic ztd-eth wct1xxp wcte11xp pciradio ztd-loc ztdummy" Building /etc/modprobe.d/zaptel... *** *** WARNING: *** If you had custom settings in /etc/modprobe.d/zaptel, *** they have been moved to /etc/modprobe.d/zaptel.bak. *** *** In the future, do not edit /etc/modprobe.d/zaptel, but *** instead put your changes in another file *** in the same directory so that they will not *** be overwritten by future Zaptel updates. *** # modprobe ztdummy FATAL: Module ztdummy not found. FATAL: Error running install command for ztdummy # modprobe zaptel FATAL: Module zaptel not found. ------------------------------------------------------------------------- On Thu, 2006-11-30 at 12:00 -0700, [EMAIL PROTECTED] wrote: > Date: Thu, 30 Nov 2006 19:19:14 +0200 > From: Roman Yeryomin <[EMAIL PROTECTED]> > Subject: [asterisk-users] zaptel compilation problems with linux > 2.6.19 > To: asterisk-users@lists.digium.com > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="us-ascii" > > Hello! > > I have problems compiling zaptel (tried 1.2.11, 1.2.10 and 1.4.0-beta2 > -- all > give the same error) with 2.6.19 kernel > > CC > [M] /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.o > In file included > from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xpd.h:26, > from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.c:28: > /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xdefs.h:93: > error: > conflicting types for 'bool' > include/linux/types.h:36: error: previous declaration of 'bool' was > here > In file included > from /home/roman/install/asterisk/zaptel-1.4.0-beta2/zconfig.h:9, > from /home/roman/install/asterisk/zaptel-1.4.0-beta2/zaptel.h:34, > from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xproto.h:29, > from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xpd.h:27, > from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.c:28: > include/linux/config.h:10:3: warning: no newline at end of file > make[3]: *** > [/home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.o] > Error 1 > make[2]: *** [/home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp] > Error 2 > make[1]: *** [_module_/home/roman/install/asterisk/zaptel-1.4.0-beta2] > Error 2 > make[1]: Leaving directory `/home/roman/install/kernel/linux-2.6.19' > make: *** [linux26] Error 2 > > seems that commenting out "typedef int bool;" in xpp/xdefs.h on line > 93 works > that out, but don't know if it's completely right thing to do > > Roman > -- (C) Matthew Rubenstein _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users