short version: me too
long version: The same thing happens on my asterisk boxes - both
built with the latest trixbox image... perhaps that's a factor? My
history is always "restart now", although I typically connect and run
"sip show peers". I haven't typed "restart now" in a long time, but
that is the first thing when I hit up-arrrow upon connecting....
I have had history written to when I type 'exit' at the console
instead of ctrl-c. I haven't tested though as the school bus just
arrived.... ;)
Todd
On Dec 11, 2006, at 3:35 PM, Douglas Garstang wrote:
-----Original Message-----
From: Aaron Daniel [mailto:[EMAIL PROTECTED]
Sent: Monday, December 11, 2006 12:57 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] CLI History
On Mon, 2006-12-11 at 11:17 -0800, Carla Schroder wrote:
On Monday 11 December 2006 9:31 am, Douglas Garstang wrote:
What's wrong with the Asterisk CLI history? When I exit
the CLI, and
re-enter, the last command in the history always defaults
to 'stop now'.
This is very bad, and it's caused accidental shutdowns
more than once.
Connected to Asterisk 1.2.9.1 currently running on hera
(pid = 17399)
Verbosity is at least 3
hera*CLI> A
No such command 'A' (type 'help' for help)
hera*CLI> B
No such command 'B' (type 'help' for help)
hera*CLI> C
No such command 'C' (type 'help' for help)
hera*CLI> D
No such command 'D' (type 'help' for help)
hera*CLI> E
No such command 'E' (type 'help' for help)
hera*CLI>
[10:[EMAIL PROTECTED](pbx3):~]# asterisk -trv
Asterisk 1.2.9.1, Copyright (C) 1999 - 2006 Digium, Inc.
and others.
Created by Mark Spencer <[EMAIL PROTECTED]>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show
warranty' for
details. This is free software, with components licensed
under the GNU
General Public License version 2 and other licenses; you
are welcome to
redistribute it under certain conditions. Type 'show
license' for details.
==============================================================
===========
Connected to Asterisk 1.2.9.1 currently running on hera
(pid = 17399)
Verbosity is at least 3
hera*CLI> stop now <-- I pressed the UP arrow upon
re-entering the console!
I'm a bit confused by your example. What are A,B,C, etc?
To exit the Asterisk
console, I type 'exit'. Asterisk continues to run, as it
should. To re-enter
the console I use asterisk -rvvv.
He was demonstrating how the CLI history shows stop now as the last
command (which um... it's a history? you're last command is gonna be
the um... last command you ran... i.e. "stop now").
For crying out loud, why is this so hard to understand? It isn't
rocket science. I said that when I exit the CLI and re-enter, no
matter what my previous set of commands was, when I hit the UP
arrow key, it was always 'stop now'. 'Stop now' WAS NOT MY PREVIOUS
COMMAND.
For the person that suggested maybe unknown commands are not added
to the history...
hera*CLI> show channels
Channel Location State Application(Data)
0 active channels
0 active calls
hera*CLI> sip show channels
Peer User/ANR Call ID Seq (Tx/Rx) Form
Hold Last Message
0 active SIP channels
hera*CLI>
(I Pressed Ctrl-c here)
[13:[EMAIL PROTECTED](pbx3):~]# asterisk -trv
Asterisk 1.2.9.1, Copyright (C) 1999 - 2006 Digium, Inc. and others.
Created by Mark Spencer <[EMAIL PROTECTED]>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'
for details.
This is free software, with components licensed under the GNU
General Public
License version 2 and other licenses; you are welcome to
redistribute it under
certain conditions. Type 'show license' for details.
======================================================================
===
Connected to Asterisk 1.2.9.1 currently running on hera (pid = 18149)
Verbosity is at least 3
hera*CLI> stop now (I pressed the up arrow key here)
As you can see, my previous commands where 'show channels' and 'sip
show channels'. When I exited the CLI and re-entered and pressed
ctrl-c, the commands in the history where not 'show channels and
'sip show channels' but 'stop now' instead.
Doug.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
