Hi Guys, I'm using Asterisk with Hylafax to send and receive faxes, currently only receinving with success.
When sending i get this: Dec 13 11:28:07.51: [ 9242]: SESSION BEGIN 000000157 03510212079 Dec 13 11:28:07.51: [ 9242]: HylaFAX (tm) Version 4.3.1 Dec 13 11:28:07.51: [ 9242]: SEND FAX: JOB 1 DEST 2079^M COMMID 000000157 DEVICE '/dev/ttyIAX' FROM 'Marco Mouta <[EMAIL PROTECTED]>' USER root Dec 13 11:28:07.51: [ 9242]: STATE CHANGE: RUNNING -> SENDING Dec 13 11:28:07.51: [ 9242]: <-- [12:AT+FCLASS=1\r] Dec 13 11:28:07.51: [ 9242]: --> [2:OK] Dec 13 11:28:07.51: [ 9242]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled Dec 13 11:28:07.51: [ 9242]: DIAL 2079^M Dec 13 11:28:07.51: [ 9242]: <-- [9:ATDT2079\r] Dec 13 11:28:16.70: [ 9242]: --> [4:BUSY] Dec 13 11:28:46.70: [ 9242]: MODEM TIMEOUT: reading line from modem Dec 13 11:28:46.71: [ 9242]: MODEM <Timeout> Dec 13 11:28:46.71: [ 9242]: SEND FAILED: JOB 1 DEST 2079^M ERR Unknown problem Dec 13 11:28:46.71: [ 9242]: <-- [5:ATH0\r] Dec 13 11:28:46.71: [ 9242]: --> [2:OK] Dec 13 11:28:46.71: [ 9242]: MODEM set DTR OFF Dec 13 11:28:46.71: [ 9242]: MODEM set baud rate: 0 baud (flow control unchanged) Dec 13 11:28:46.71: [ 9242]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) Dec 13 11:28:46.71: [ 9242]: SESSION END I Must say on the reception side is a normal fax connected to pstn line, and to send fax via Asterisk+Hylafax i've tested TE110P and X100P board. I got few sucess with x100p and couldn't send even one with TE110p Any tips? On 12/13/06, Noc Phibee <[EMAIL PROTECTED]> wrote:
Hi i use now iaxmodem for receive fax and that's work very good with Hylafax ;=) Do you know if we can sent fax using iaxmodem and Hylafax ? when i test: déc 13 13:47:21.12: [13725]: SESSION BEGIN 000000014 330426690268 déc 13 13:47:21.12: [13725]: HylaFAX (tm) Version 4.3.0 déc 13 13:47:21.12: [13725]: SEND FAX: JOB 2 DEST 0426690268 COMMID 000000014 DEVICE '/dev/iaxmodem1' FROM 'localtest>' USER test déc 13 13:47:21.12: [13725]: STATE CHANGE: RUNNING -> SENDING déc 13 13:47:21.12: [13725]: <-- [12:AT+FCLASS=r] déc 13 13:47:21.12: [13725]: --> [2:OK] déc 13 13:47:21.12: [13725]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled déc 13 13:47:21.12: [13725]: DIAL 0426690268 déc 13 13:47:21.12: [13725]: <-- [15:ATDT0426690268\r] déc 13 13:47:21.12: [13725]: --> [11:NO DIALTONE] déc 13 13:47:21.12: [13725]: SEND FAILED: JOB 2 DEST 0426690268 ERR No local dialtone déc 13 13:47:21.12: [13725]: <-- [5:ATH0\r] déc 13 13:47:21.12: [13725]: --> [2:OK] déc 13 13:47:21.12: [13725]: MODEM set DTR OFF déc 13 13:47:21.12: [13725]: MODEM set baud rate: 0 baud (flow control unchanged) déc 13 13:47:21.12: [13725]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) déc 13 13:47:21.12: [13725]: SESSION END Thanks bye _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
