> It looks like 107 is busy ;-) > Please increase verbosity, like > set verbose 5 > capi debug > to see what is happening.
Hi Armin, Verbose was at 30 :) 107 is not busy since i can call it from 102, which is another internal phone. All internal phones are busy for Asterisk... Here is the log with verbose at 100 and capi debug enabled : -- Executing Dial("SIP/Greg-081f5a10", "CAPI/ISDN1/b:107||rtT") in new stack > data = ISDN1/b:107 > parsed dialstring: 'ISDN1' 'b' '107' '' > capi request for interface 'ISDN1' > parsed dialstring: 'ISDN1' 'b' '107' '' == ISDN1: Call CAPI/ISDN1/107-1e (pres=0x00, ton=0x00) CONNECT_REQ ID=001 #0x1002 LEN=0047 Controller/PLCI/NCCI = 0x1 CIPValue = 0x1 CalledPartyNumber = <80>107 CallingPartyNumber = <00 80>b CalledPartySubaddress = default CallingPartySubaddress = default BProtocol B1protocol = 0x1 B2protocol = 0x1 B3protocol = 0x0 B1configuration = default B2configuration = default B3configuration = default GlobalConfiguration = default BC = default LLC = default HLC = default AdditionalInfo BChannelinformation = <00 00> Keypadfacility = default Useruserdata = default Facilitydataarray = default SendingComplete = default -- Called ISDN1/b:107 > CAPI devicestate requested for ISDN1/107 > CAPI devicestate requested for ISDN1/107 CONNECT_CONF ID=001 #0x1002 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 -- ISDN1: received CONNECT_CONF PLCI = 0x101 INFO_IND ID=001 #0x11a8 LEN=0016 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x18 InfoElement = <8a> INFO_RESP ID=001 #0x11a8 LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1: info element CHANNEL IDENTIFICATION 8a INFO_IND ID=001 #0x11a9 LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x800d InfoElement = default INFO_RESP ID=001 #0x11a9 LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1: info element SETUP ACK INFO_IND ID=001 #0x11ab LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8002 InfoElement = default INFO_RESP ID=001 #0x11ab LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1: info element CALL PROCEEDING -- CAPI/ISDN1/107-1e is proceeding passing it to SIP/Greg-081f5a10 INFO_IND ID=001 #0x11ad LEN=0037 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x1c InfoElement = <91 a1 13 02 02 8f> <02 01 22>0<0a a1 05>0<03 02 01 00 82 01 01> INFO_RESP ID=001 #0x11ad LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1: info element FACILITY INFO_IND ID=001 #0x11ae LEN=0017 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8 InfoElement = <81 d8> INFO_RESP ID=001 #0x11ae LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1: info element CAUSE 81 d8 INFO_IND ID=001 #0x11af LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8045 InfoElement = default INFO_RESP ID=001 #0x11af LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1: info element DISCONNECT -- ISDN1: Disconnect case 1 -- CAPI/ISDN1/107-1e is busy == ISDN1: CAPI Hangingup -- ISDN1: activehangingup (cause=88) DISCONNECT_REQ ID=001 #0x1003 LEN=0018 Controller/PLCI/NCCI = 0x101 AdditionalInfo BChannelinformation = default Keypadfacility = default Useruserdata = default Facilitydataarray = default SendingComplete = default == Everyone is busy/congested at this time (1:1/0/0) -- Executing Hangup("SIP/Greg-081f5a10", "") in new stack == Spawn extension (macro-appel_sortant, s, 2) exited non-zero on 'SIP/Greg-081f5a10' in macro 'appel_sortant' == Spawn extension (macro-appel_sortant, s, 2) exited non-zero on 'SIP/Greg-081f5a10' > CAPI devicestate requested for ISDN1/107 > CAPI devicestate requested for ISDN1/107 DISCONNECT_CONF ID=001 #0x1003 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 INFO_IND ID=001 #0x11b1 LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x805a InfoElement = default INFO_RESP ID=001 #0x11b1 LEN=0012 Controller/PLCI/NCCI = 0x101 -- ISDN1: info element RELEASE COMPLETE DISCONNECT_IND ID=001 #0x11b3 LEN=0014 Controller/PLCI/NCCI = 0x101 Reason = 0x34d8 DISCONNECT_RESP ID=001 #0x11b3 LEN=0012 Controller/PLCI/NCCI = 0x101 > CAPI INFO 0x34d8: Incompatible destination == ISDN1: Interface cleanup PLCI=0x101 asteriskdev*CLI> Greg. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users