in h323.conf you have still:
disallow=all
allow=all
try change to:
disallow=all
allow=alaw
nik600 wrote:
On 12/15/06, Pavel Jezek <[EMAIL PROTECTED]> wrote:
probably you haven't g729 installed in asterisk, use g711 instead, put
this in h323.conf and in callmanager place asterisdk gateway in region
that will use g711...
disallow=all
allow=alaw
alternatively you can find g729 codecs binaries here:
http://kvin.lv/pub/Linux/Asterisk/
I am experiencig the same problem:
h323.conf:
disallow=all
allow=all ; turns on all installed codecs
sip.conf:
disallow=all ; First disallow all codecs
;allow=all ; Allow codecs in order of preference
allow=g711
allow=ulaw
extension.conf:
exten = 3298,1,Set(SIP_CODEC=alaw)
exten = 3298,2,Answer
exten = 3298,3,Dial(SIP/[EMAIL PROTECTED])
-- Executing Set("H323/ip$172.z.z.z:1630/20", "SIP_CODEC=alaw") in
new stack
-- Executing Answer("H323/ip$172.z.z.z:1630/20", "") in new stack
-- Executing Dial("H323/ip$172.1z.z.z:1630/20",
"SIP/[EMAIL PROTECTED]") in new stack
-- Called [EMAIL PROTECTED]
-- SIP/193.x.x.x-40451408 is ringing
-- Got SIP response 606 "Not Acceptable" back from 193.x.x.x
== No one is available to answer at this time (1:0/0/0)
== Auto fallthrough, channel 'H323/ip$172.z.z.z:1630/20' status is
'NOANSWER'
What means 606 ?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
