On Wed, 2006-12-13 at 14:21 +1100, Paul Hales wrote: > I would be very surprised if your modem is supported by Asterisk - but I > suppose it's worth a try. > > What does 'zap show status' and 'zap show channels' show in the Asterisk > CLI? > > PaulH
OK. I got the Motorola X100P put in: Relevant lspci -v output: 05:01.0 Communication controller: Motorola Wildcard X100P Subsystem: Motorola Unknown device 0000 Flags: bus master, medium devsel, latency 32, IRQ 22 I/O ports at b800 [size=256] Memory at ff900000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 However, although I can modprobe wctdm successfully, ztcfg still balks: camille ~ # modprobe wctdm camille ~ # /sbin/ztcfg -vv Zaptel Configuration ====================== Channel map: Channel 02: FXS Kewlstart (Default) (Slaves: 02) 1 channels configured. ZT_CHANCONFIG failed on channel 2: No such device or address (6) "zap show channels" comes back with encouraging results though: camille*CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo default Do I need to moprobe something else or alter my kernel config for ztcfg not to error? -Michael Sullivan- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users