Tzafrir Cohen wrote:
On Tue, Dec 19, 2006 at 12:44:39PM -0500, Lee wrote:
In the CLI:
sip show peer axVoice
show dialplan main_menu
set verbose 3
Then drop the call file
What is the CLI trace of the above?
Hi, thanks for responding. Please see the output below.
Please note that moving a call file into /var/spool/asterisk/outgoing
did not produce any CLI output. The file was copied correctly, I
believe and not present in the /outgoing directory when I checked with a
simple ls command.
# cp lee.call test.call
# mv test.call /var/spool/asterisk/outgoing
Are both the current directory and /var/spool/asterisk/outgoing on the
same filesystem? If not, a 'mv' is implemented through a copy.
Anyway, you left out the CLI output of dropping trhe file.
Can Asterisk read that file? Write to it?
Hi,
As I mentioned above, the action of dropping a .call into the /outgoing
directory did not produce any CLI output. I did this through 2 putty
sessions. The first, we setup to watch the CLI output and the second
was to use the commandline to move the .call into the /outgoing directory.
Asterisk must be doing *something* with the file (if just deleting it)
because if I check the /outgoing directory after I move the file, there
is no file there. It's deleted.
--
Warm Regards,
Lee
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users