I'm using a mix of Cisco 7960, Linksys SPA-942, Cisco 7961, Cisco 7970
phones in a paging group. I have all the phones set up with an extra
line that auto answers the dial from my paging extension when the
primary line is not in use. All of these are operating correctly however
the 7961/7970s all ring once and then auto answer so the person paging
all the phones has the first part of his dictation clipped. This only
happens with 7961/7970. The linksys and the older 7960 (running 7.4 sip
firmware) all answer right away and they hear everything. Anyone have
the newer 7961s and 7970s running 8.X SIP firmware auto-answering
without any initial ring?
Here are some configuration snippets:
extensions.conf
[globals]
INTERCOM=Local/[EMAIL PROTECTED]&Local/[EMAIL PROTECTED]&Local/[EMAIL PROTECTED]
[macro-page]
; Paging macro:
; Check to see if SIP device is in use and DO NOT PAGE if they are
; ${ARG1} - Device to page
; ${ARG2} - Other line (not paging line...we don't want to disturb
their other line)
;
exten => s,1,ChanIsAvail(${ARG2}|js) ; j is for dump and s is for ANY
call to indicate busy
exten => s,n,NoOp(${AVAILSTATUS})
exten => s,n,SIPAddHeader("Alert-Info: <Bellcore-dr5>") ; This is the
shortest ringer for the Cisco phones
exten => s,n,SIPAddHeader(Call-Info:\;answer-after=0) ; For Linksys SPA
exten => s,n,NoOp() ; Add others here
exten => s,n,Dial(${ARG1}||A())
exten => s,n,Hangup
exten => s,102,Hangup()
[page] ; Paging context
exten => 2201_com,1,Macro(page,SIP/2201_com,SIP/2201) ; 7970
exten => 2202_com,1,Macro(page,SIP/2202_com,SIP/2202) ; 7961
exten => 2203_com,1,Macro(page,SIP/2203_com,SIP/2203) ; 7960
exten => 2204_com,1,Macro(page,SIP/2204_com,SIP/2204) ; 7960
exten => 2205_com,1,Macro(page,SIP/2205_com,SIP/2205) ; 7960
exten => 2207,1,Macro(page,SIP/2207,SIP/2207) ; Linksys SPA-942
Here are the configuration lines relevant to auto-answer in the
79x1/7970 configuration files:
<autoAnswerTimer>0</autoAnswerTimer>
<autoAnswerAltBehavior>false</autoAnswerAltBehavior>
<autoAnswerOverride>true</autoAnswerOverride>
This is configured under sipLines > line in the XML file
<autoAnswer>
<autoAnswerEnabled>3</autoAnswerEnabled>
</autoAnswer>
The above phone configuration will allow the phone to auto-answer but
after one ring. I'd like it to just work immediately. Any help would be
appreciated.
Jeremiah
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users