Hi All, as good? But to tell the resolution of this problem: I change board TE110P and is all good now,is functioning almost perfectly. :) When I occupy channel "17" of the board and the call is without audio is as if it did not exist "TX" and "RX". I find that this is problem in the Siemens HiPath 4000.Somebody already passed previously therefore?
Thank's to all Best Regards Josué 2006/12/30, Josué Conti <[EMAIL PROTECTED]>:
Hi Francoise, thanks will be this attention. I verified to jumper of the TE110P, That´s closed (indicating link E1), in the tests without crc4, the error is the same, I of not intervene with nothing. Stranger is that I obtain you effect normally called and received too. In the ztcfg - vv to appear the 30 channels in isdn. Thank´s in advance Best Regards Josué 2006/12/29, [EMAIL PROTECTED] <[EMAIL PROTECTED]>: > > Hi Josué, > > Have you checked the strap on the TE110P board ? > You must have it on the E1 position, not T1 (open ?, I don't remember at > > this hour, sorry). > Check also without crc4. > And recheck ztcfg -vvv. > > Best Regards, > Francois BERGERET, > France. > > -----Message d'origine----- > De : [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] De la part de Josué > Conti > Envoyé : vendredi 29 décembre 2006 23:27 > À : Asterisk Users Mailing List - Non-Commercial Discussion > Objet : Re: [asterisk-users] TE110P with Qsig > > > Hi Matthew thank's will be attention. > I believe that the configurations are correct, I changed of server, one > another hardware and the problem remains the same. :( > Changing of protocol, for euroisdn the problem remains. > > Stranger, does not find? > > Best Regards > > Josue > > zaptel.conf > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > > loadzone=us > defaultzone=us > > zapata.conf > [trunkgroups] > > [channels] > language=us > context=default > switchtype=qsig > nsf=none > pridialplan=unknown > prilocaldialplan=unknown > facilityenable = yes > signalling=pri_cpe > ;rxwink=300 > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > restrictcid=no > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > immediate=no > callerid=asreceived > musiconhold=default > group=1 > channel=>1-15 > channel=>17-31 > > > > 2006/12/29, Matthew Fredrickson < [EMAIL PROTECTED]>: > It sounds like it isn't configured correctly. Are you sure that your > cabling is ok and that your span= line is correct? > > Matthew Fredrickson > > On Dec 28, 2006, at 8:29 PM, Josué Conti wrote: > > > Hi all, as good? > > I am trying to go up a board TE110P with link E1 ISDN PRI to establish > > > connection with a central office Siemens HiPath 4000. But I am having > > the following errors: > > > > Server1:~ # asterisk -r > > Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others. > > Created by Mark Spencer <[EMAIL PROTECTED]> > > Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for > > details. > > This is free software, with components licensed under the GNU General > > > Public > > License version 2 and other licenses; you are welcome to redistribute > > it under > > certain conditions. Type 'show license' for details. > > > > > ======================================================================= > > == > > Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:54 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:55 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:56 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Bad FCS (8) on Primary D-channel of span 1 > > Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: HDLC Abort (6) on Primary D-channel of span 1 > > Dec 28 21:31:57 NOTICE[5484]: chan_zap.c:8176 pri_dchannel: PRI got > > event: Alarm (4) on Primary D-channel of span 1 > > Dec 28 21:31:57 WARNING[5484]: chan_zap.c:2289 pri_find_dchan: No > > D-channels available!Using Primary channel 16 as D-channel anyway! > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 1: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 1 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 2: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 2 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 3: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 3 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 4: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 4 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 5: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 5 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 6: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 6 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 7: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 7 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 8: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 8 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 9: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 9 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 10: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 10 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 11: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 11 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 12: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 12 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 13: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 13 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 14: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 14 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 15: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 15 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 17: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 17 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 18: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 18 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 19: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 19 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 20: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 20 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 21: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 21 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 22: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 22 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 23: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 23 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 24: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 24 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 25: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 25 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 26: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 26 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 27: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 27 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 28: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 28 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 29: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 29 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 30: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 30 > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:6337 handle_init_event: > > Detected alarm on channel 31: Red Alarm > > Dec 28 21:31:57 WARNING[5485]: chan_zap.c:1435 zt_disable_ec: Unable > > to disable echo cancellation on channel 31 > > Server1*CLI> pri show span 1 > > Primary D-channel: 16 > > Status: Provisioned, In Alarm, Down, Active > > Switchtype: Q.SIG switch > > Type: CPE > > Window Length: 0/7 > > Sentrej: 0 > > SolicitFbit: 0 > > Retrans: 0 > > Busy: 0 > > Overlap Dial: 0 > > T200 Timer: 1000 > > T203 Timer: 10000 > > T305 Timer: 30000 > > T308 Timer: 4000 > > T313 Timer: 4000 > > N200 Counter: 3 > > server1*CLI> > > > > I all changed the hardware for another server and changed to all the > > handles, balun and the SPAN of HiPath 4000. It will be some trouble of > > the hardware in the TE110P? > > > > Best Regards > > > > Josué > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users