Re: [asterisk-users] MFC/R2 problems

[yusuf]

Hi,

thanks for the help. It turns out the this device I had, an Orion GSM gateway, does not talk MFC/R2, 
but some variant of R2, according to Steve U.

thanks anyways :)

Facundo Ameal wrote:
These are the different meanings for the diferrent error codes:
T1 TIMEOUT              = 32769
T2 TIMEOUT              = 32770
T3 TIMEOUT              = 32771
UNEXPECTED MF SIGNAL    = 32772
UNEXPECTED CAS          = 32773
INVALID STATE           = 32774
SET_CAS FAILURE         = 32775
SEIZE ACK TIMEOUT       = 32776
DEVICE IO ERROR         = 32777
T1B TIMEOUT             = 32778

I hope it helps.

Greets

On 1/8/07, yusuf <[EMAIL PROTECTED]> wrote:

Hi,

if that means I should post my config, here goes:

zaptel:
span=1,1,3,cas,hdb3,crc4
cas=1-15:1101
cas=17-31:1101

unicall.conf:
protocolvariant=id,10,10
protocolend=cpe
group=1
channel => 1-15
channel => 17-31

wanpipe1.conf
FE_MEDIA        = E1
FE_LCODE        = HDB3
FE_FRAME        = CRC4
FE_LINE         = 1
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0
TE_HIGHIMPEDANCE        = NO
LBO             = 120OH
TE_SIG_MODE     = CAS
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 1
TDMV_DCHAN      = 16

[w1g1]
ACTIVE_CH       = ALL
TDMV_ECHO_OFF   = NO
TDMV_HWEC       = NO



Josué Conti wrote:
> Hi Yusuf, how are you?
> It orders in the list its configurations, so that let us can help.
>
> Best Regards
>
> Josue
>
> 2007/1/8, yusuf < [EMAIL PROTECTED] 
<mailto:[EMAIL PROTECTED]>>:
>
>     Hi all,
>
>     I have Asterisk 1.2.10, zaptel 1.2.7, spandsp-0.0.3pre22 compiled,
>     and a Sangoma A101, and when I
>     make a call I get this:
>
>
>     Jan  8 13:04:06 DEBUG[12252]: chan_unicall.c:2000 
unicall_exception:
>     Exception on 19, channel 1
>     Jan  8 13:04:06 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1      <- 1101
>     [1/      40/Seize /Idle         ]
>     Jan  8 13:04:06 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 0 on  ->
>     [2/      40/Group I /Idle         ]
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 R2 prot. err.
>     [2/      40/Group I /DNIS         ] cause 32769 - T1 timed out
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 0 off ->
>     [1/       1/Idle /Idle         ]
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 1001  ->
>     [1/       1/Idle /Idle         ]
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:2644 
handle_uc_event:
>     Unicall/1 event Protocol failure
>          -- Unicall/1 protocol error. Cause 32769
>     Jan  8 13:04:11 WARNING[12252]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 Channel echo cancel
>     Jan  8 13:04:11 DEBUG[12252]: chan_unicall.c:955 
unicall_disable_ec:
>     disabled echo cancellation on
>     channel 1
>
>     Jan  8 13:04:11 WARNING[12250]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1      <- 1001
>     [1/       1/Idle /Idle         ]
>     Jan  8 13:04:11 WARNING[12250]: chan_unicall.c:627 unicall_report:
>     MFC/R2 UniCall/1 1001  ->
>     [1/       1/Idle /Idle         ]
>          -- Hungup 'UniCall/1-1'
>
>
>     What does "- Unicall/1 protocol error. Cause 32769" mean, and can
>     anyone help me.
>
>     --





--
thanks,
Yusuf

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users