Hi guys, I got also problems with SPA 941 and 942, pour sound (a kind of click noise) that when i set volume sound lower almost can't notice, but still exists.
I also notice on SIP to SIP calls , echo that could only be justified by Handsets hardware quality. When i make calls using Xlite with Plantronics DSP 400 USB micro and headset everything works like a charm. I've been told, by some one with longer experience with CISCO phones 7960 that if some one try to just replace in the handset the microphone inside with one form a cheaper traditional phone will get this VoIp hardphone working perfect. But in my case i didn't try that. If someone has a SPA942 on their own lab and can try this without damaging the phone would be nice info to share, I believe! Best regards, Marco Mouta On 1/17/07, Eric ManxPower Wieling <[EMAIL PROTECTED]> wrote:
Andrew Joakimsen wrote: > I too seem to have the same problem, dont know about "poor quality" > but its certainly not loud enough, I have to put my mouth to the > microphone, otherwise the other end reports they cannot hear me. This > does however seem to do a good job to cancel out the background noise In the SIPura setup change the packet size from .3 to .2. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users