Thanks for your help, but I've already adjusted timers on the source code. I found your document a week ago and read it. Do you really think that is a matter of timers only?
Greets! On 1/18/07, Moises Silva <[EMAIL PROTECTED]> wrote:
Sometimes timers need to be adjusted on the mfcr2 source code. Sometimes is missconfiguration. Anyway, may be this document can help you out to debug the problem: http://moy.ivsol.net/unicall/mfcr2-asterisk-unicall-0.2-english.pdf Kind Regards On 1/17/07, Facundo Ameal <[EMAIL PROTECTED]> wrote: > Hi everyone! > I'm having some issue trying to place calls with asterisk connected to > an E1 R2 from Telmex Argentina. The other E1 port is connected to a > Meridian which also uses R2 protocol. Calls sometimes fail with > different error messages such as: Unicall protocol error 32773, 32772, > 32769. Some other calls fail saying: > Far end disconnected(cause=Destination out > of order [27]) > Far end disconnected(cause=User alerting, > no answer [19]) > Far end disconnected(cause=Switching > equipment congestion [42]) > Far end disconnected(cause=User busy [17]) > > I don't think those causes are real, because if you use another line, > yo establish the call. Could it be something about timing of ABCD > bits? > > I'm using: > Asterisk 1.2.6 > Zaptel 1.2.5 > libmfcr2 0.0.3 > libunicall 0.0.3 > libsupertone 0.0.2 > spandsp-0.0.3 > > And this is my unicall.conf: > > [channels] > loglevel=1023 > usecallerid=yes > hidecallerid=no > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callerid=asreceived > callreturn=yes > echocancel=no > echocancelwhenbridged=no > echotraining=no > rxgain=0.0 > txgain=0.0 > callgroup=1 > pickupgroup=1 > immediate=no > > musiconhold=default > protocolclass=mfcr2 > protocolvariant=ar,10,4,15 > protocolend=cpe > group=1 > context=from-zaptel > channel => 1-15 > channel => 17-29 > > loglevel=0 > usecallerid=yes > hidecallerid=no > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callerid=asreceived > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > echotraining=yes > rxgain=0.0 > txgain=0.0 > callgroup=1 > pickupgroup=1 > immediate=no > > protocolclass=mfcr2 > protocolvariant=ar,0,12,12 > protocolend=cpe > group=2 > context=hacia-afuera > channel => 32-46 > channel => 48-60 > > > Thanks in advance! > > Greets! > > > > -- > Facundo Ameal. > fameal<at>gmail<dot>com > Linux User #395088 > > Share your knowledge, use free software. > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org" _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- Facundo Ameal. fameal<at>gmail<dot>com Linux User #395088 Share your knowledge, use free software. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users