Hi again all, I have searched the list for help with my problem but I canīt find an answer. I only manage to get one port of my TDM400P card working.
When I do dmesg I get following, seems like four discovered ports: --------------- Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 11 for device 02:00.0 PCI: Sharing IRQ 11 with 02:07.1 PCI: Sharing IRQ 11 with 02:0c.0 Freshmaker version: 63 Freshmaker passed register test Module 0: Installed -- AUTO Module 1: Installed -- AUTO Module 2: Installed -- AUTO Module 3: Installed -- AUTO Found a Wildcard FXS: Wildcard TDM400P REV E/F (4 modules) Registered tone zone 5 (Finland) ---------------- But when I do ztcfg -vv I only get one port configured: ---------------- Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) 1 channels configured. ---------------- How do I configure/load the rest of the ports? Regards, ---JanM--- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users