Hi,
I had previously posted about connecting an AS5300 to * via SIP/H323. I got it to work via SIP, but
only 1 call at a time would work, and if a user from the * side hung up, the cisco would'nt catch
the hangup.
I an now trying to hook up to the cisco via E1, with a Sangoma A101 card in my * box. I would like
it such that I call from * via E1/PRI to the cisco, and call out via R2 to another device.
I have it to a point where the channels are configured, and the B and D channels come up, and I can
place calls to the Cisco. There howeever, the calls just seem to get stuck, and dont seem to go out
via the outgoing dial peer.
Here is my config, can someone help me fix it.
Using 2800 out of 126968 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname Bit
!
boot system flash c5300-is-mz.122-2.XB7.bin
boot system flash
aaa new-model
!
!
aaa accounting connection h323 start-stop group radius
aaa session-id common
enable secret 5 $1$y13J$DLkZEIGsSyabWTtUPIz6J1
enable password 7 02030755
!
username p2p nopassword
username ecn nopassword
!
!
resource-pool disable
!
ip subnet-zero
no ip source-route
no ip routing
!
isdn switch-type primary-net5
voice rtp send-recv
!
voice service pots
!
voice service voip
sip
bind all source-interface FastEthernet0
!
voice class codec 723
codec preference 1 g711alaw
!
voice class codec 1
codec preference 1 g711alaw
!
voice class codec 7
codec preference 1 g711alaw
!
!
!
!
!
!
ivr prompt memory 16384 files 1000
fax interface-type fax-mail
mta receive maximum-recipients 0
call-history-mib max-size 500
dial-control-mib max-size 1200
!
controller E1 0
ds0-group 0 timeslots 1-15,17-31 type r2-digital
ds0 busyout 15,27 hard
!
controller E1 1
clock source line primary
pri-group timeslots 1-31
!
controller E1 2
shutdown
!
controller E1 3
shutdown
pri-group timeslots 1-31
!
gw-accounting h323
gw-accounting h323 vsa
gw-accounting voip
!
!
interface Ethernet0
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial1:15
no ip address
isdn switch-type primary-net5
isdn incoming-voice modem
isdn T321 40000
isdn T310 4000
isdn negotiate-bchan
no cdp enable
!
interface Serial3:15
no ip address
isdn switch-type primary-net5
no cdp enable
!
interface FastEthernet0
ip address 192.168.0.3 255.255.255.0
no ip route-cache
no ip mroute-cache
duplex full
speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.0.1
no ip http server
!
!
!
call rsvp-sync
!
voice-port 0:0
echo-cancel coverage 16
compand-type a-law
timeouts interdigit 2
!
voice-port 3:D
compand-type a-law
!
voice-port 1:D
input gain -6
compand-type a-law
cptone ZA
timeouts interdigit 4
!
!
mgcp profile default
!
dial-peer voice 1 pots
destination-pattern .T
port 0:0
forward-digits all
!
gateway
resource threshold high 100 low 95
!
sip-ua
sip-server ipv4:192.168.0.149
!
alias exec sc show call active voice brief
alias exec scao show call ac v b | in Orig
alias exec isdn show isdn status
alias exec saveconfig copy running-config startup-config
alias exec exec hist sho call his vo b
alias exec ts sh contr e1 0 t 1-31
alias exec count sh contr e1 0 call
alias exec active show call activ voice br
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
exec-timeout 45 0
password 7 #######
!
end
--
thanks,
Yusuf
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
