I'm having problems with a TDM22B. The FXO modules work fine. Both FXS
modules fail to initialized.
The error messages I see when the module loads:
Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
I already RMA'ed a TDM22B because of this problem. Now that the
replacement shows a similar issue, I want to see if anyone else can
think of something to try; at least until Monday when I can get an RMA
number for this card.
If it helps, I have a TDM20B (just FXS modules) that does not see this
problem when I place it in the same slot.
Here is what dmesg shows for the TDM22B when the system boots, or when I
issues modprobe wctdm:
Freshmaker version: 73
Freshmaker passed register test
!!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
!!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
Module 0: FAILED FXS (FCC)
!!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
!!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
!!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
!!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
!!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
!!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
!!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600
!!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
!!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000
!!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320
!!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C
!!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100
!!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10
!!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
!!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
!!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
!!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000
!!!!! Init Indirect Registers UNSUCCESSFULLY.
Indirect Registers failed verification.
Module 1: FAILED FXS (FCC)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules)
Thanks,
MikeC
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
