Hi
"Billing Pulses" only apply to analogue lines. You need special hardware in
the PBX interface to detect them and pass them on to the Billing software.
To my knowlege there is no Asterisk compatible hardware that does this.
George
----- Original Message -----
From: "Stefano Corsi" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Wednesday, February 07, 2007 4:04 PM
Subject: [asterisk-users] Billing pulses
Hello,
I've discovered that in Italy ISDN lines can be programmed to generate a
"billing pulse" every n seconds (it dipends from the pricebook). The pulse
has these figures:
frequency
.................................................................... 12
kHz ± 1%
level
..........................................................................
200 mVrms on 200
distortion...................................................................
< 5%
pulse duration
.............................................................125 ± 25 ms
pause duration
................................................................> 180 ms
period
.......................................................................>
300 ms
Does someone know if these values can be used somehow to get an accurate
billing using asterisk with these lines? Could be a matter of
configuration or programming?
Thanks
Stefano
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.17.29/673 - Release Date: 2/6/2007
5:52 PM
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
