that I have! :) Have a single X100P in the system and ztcfg configures the board no problem. zttool confirms the board is there and shows RED when the phone line is removed and OK when the phone line is plugged in.
Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yuan LIU Sent: Wednesday, February 07, 2007 2:02 PM To: asterisk-users@lists.digium.com Subject: RE: [asterisk-users] Can't get asterisk to compile chan_zap(was"NewIssue") From: "David Ruggles" <[EMAIL PROTECTED]> Date: Wed, 7 Feb 2007 12:15:37 -0500 >I captured the output of ./configure and found the following lines: > ><lines snipped> >checking zaptel/tonezone.h usability... yes >checking zaptel/tonezone.h presence... yes >checking for zaptel/tonezone.h... yes ><lines snipped> >checking for ZT_TONE_DTMF_BASE in zaptel.h... Yes ><lines snipped> > >So it seems to be finding the /usr/include/zaptel directory and files fine. >Is there anything else I can do that might offer information that could help >track this problem down? At least one version of Asterisk (1.4?) requires correct kernel driver configuration before compilation. Have you done ztconfig and stuff? Yuan Liu >Thanks, > >David Ruggles >CCNA MCSE (NT) CNA A+ >Network Engineer Safe Data, Inc. >(910) 285-7200 [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
